SPECIAL FEATURES - TIGHTENING TORQUES (m.daN)
B1DP1LLD
Engines: 9HY - 9HZ
Crankshaft bearing cap cover.
Pre-tighten the 10 screws (17) (from 1 to 10) to
Pre-tighten the 14 screws (19) (from 11 to 24) to
Tighten the 2 screws (18) (inside the flywheel bell housing) to
Slacken the screws (17) by
Tighten the 10 screws (17) (from 1 to 10) to
Tighten the screws (17) (from 1 to 10) by
Tighten the 14 screws (19) (from 11 to 24) to
(17) Bearing cap fixing screws (screws M9)
(18) Crankshaft bearing cap cover screws (screws M6)
(19) Crankshaft bearing cap cover screws (screws M6)
117
Cylinder block
Tightening method:
C4
1
0,6
0,8
180°
3
140°
0,8