AUXILIARY EQUIPMENT DRIVE BELT
C4
Engine: KFU
Véhicule with air conditioning.
Removing.
Place tool [4] at «a».
Compress the dynamic tensioner roller.
Place tool [3] at «b».
Remove the auxiliary equipment drive belt.
IMPERATIVE: Check that the dynamic tensioner roller turns freely (without play and without tight
spots) .
Refitting.
NOTE: Visually check the condition of the auxiliary equipment drive belt prior to refitting.
Place tool [4] at «a».
Compress the dynamic tensioner roller.
Remove tool [3].
Refit the auxiliary equipment drive belt.
Respect the following sequence:
- Crankshaft pinion, aircon compressor pulley, alternator pulley, dynamic tensioner roller.
Remove the tools.
Complete the refitting.
B1EP1GQD
157