CHECKING AND SETTING THE VALVE TIMING
C4
Engine: RFK
Checking and setting the timing (continued).
Refitting (continued).
Remove the tools [1] and [2].
Refit the upper RH engine support.
Remove the workshop hoist.
Rotate the crankshaft ten times (normal direction of rotation) .
IMPERATIVE: No exterior pressure or action should be applied on the timing belt.
Suspend the engine using a workshop hoist.
Remove the upper RH engine support.
Peg the inlet camshaft pulley, using tool [1].
Checking.
Timing belt tension.
IMPERATIVE: Check the position of the index «a», it should be opposite the slot «f». If the position of the index «a» is not correct, repeat
the operations to tension the timig belt.
Complete the refitting.
IMPERATIVE: Carry out the operations that are necessary following a reconnection of the battery (see corresponding operation) .
231