CITROEN 2005 C4-XSARA-XSARA PICASSO BERLINGO Owner's Manual page 300

XSARA PICASSO
B1BP1ZXD
CHECKS: TURBO PRESSURE
[1] Pressure gauge for checking boost pressure
[2] Sleeve for checking boost pressure
Checks.
IMPERATIVE: respect the following checking requirements: Engine at running temperature.
Vehicle running at full load.
Preparation.
Remove the collar (3) and the sleeve.
Insert the tool [2] between the pipe (1) and the duct (2).
Position tool [1] in the vehicle.
Connect the pressure gauge [1] to the tool [2] with its tube «a» long enough for the gauge to be
positioned inside the vehicle.
Procedure.
Start the engine.
Engage first gear and start the engine.
Engage the gears up to third gear.
Decelerate to 2000 rpm.
Gradually accelerate.
Check the pressure: 0.95 ± 0.05 bar.
Remove the tools, refit the collars (3) and the sleeve.
294
Engine: RHY
Tools.
: 4073-T.A Kit 4073-T
: 4185-T