Volume Limit; Lei Power On Level; Mute Level; Option Setup - Denon AVR-1909 Owner's Manual

ENGLISH
II

Volume Limit

Make a setting for maximum volume.
[Selectable items]
~:
Do not set a maximum volume.
-2OdB
Set the maximum volume to -20 dB.
-1OdB
Set the maximum volume to -10 dB.
OdB
Set the maximum volume to 0 dB.
I
.. Power On Level
Define the volume setting that is active when the power is turned
on.
[Selectable items]
I:
Last
Use the memorized setting from the last session.
Always use the muting on condition when power
is turned on.
[Variable range]
-7OdB - +18dB Set the volume level when the power is turned on
in units of 1 dB.
II

Mute Level

Set the amount of attenuation when muting is on.
[Selectable items]
~:
The sound is cut off entirely.
-40dB :
The sound is attenuated by 40 dB.
-2OdB :
The sound is attenuated by 20 dB.
35
I
For details on how to select, set and cancel settings for each menu, see "Menu Operations" (ll2iT'page 22).

Option Setup

Make vanous other settings
• Menu screen •
1
2.Manual Setup
2-5.0ption
1. Speaker Setup
[J"1.Amp
2. HDMI Setup
3.Audio Setup 2. Vol.
4. ZONE2 Setup 3.Source
IT5.0ption Setup 4.0n-Screen
5.Quick
6. Remote
7. 2Way
8.Display
9. Setup

.. Amp Assign

Define how the amplifier for the surround back speaker channels
is used.
The places where the surround back amplifier are used can be set
freely according to the usage environment. This makes it possible to
output sound to rooms other than the room (the MAIN ZONE) where
surround playback is performed (multi-zone playback) or play the sound
with high quality using the front speakers (bi-amp connections).
[Selectable items]
7.1ch : The surround back channel is output from the
speakers connected to the SURR.BACK/AMP
ASSIGN terminals.
ZONEZ
:When ZONE2 power is on, the ZONE2 channel
- - - - - - is output from speakers connected to the SURR.
BACK/AMP ASSIGN terminals.
FrontA Bi-Amp .
The Front A channel for Bi-Amp use is output from
the speakers connected to the SURR.BACK/AMP
ASSIGN terminals.
FrontB Bi-Amp :
The Front B channel for Bi-Amp use is output from
the speakers connected to the SURR.BACK/AMP
ASSIGN terminals.
For details, see" Amp Assign / Multi-zone Connections and Operations"
(&page 69 - 72)
fJ
Volume Control
Set the MAIN ZONE volume setting.
Volume Limit
Make a setting for maximum volume.
Setup
Assign [Selectable items]
Control
~:
Delete
Do not set a maximum volume.
Display
Select Name
-2OdB
Set the maximum volume to -20 dB.
ID Setup
Remo t e
-1OdB
Set the maximum volume to -10 dB.
Lock
OdB
Set the maximum volume to 0 dB .
Power On Level
This sets the volume set when the MAIN ZONE's power is turned
on.
[Selectable items]
Last
[Variable range]
-81dB - +18dB
Mute Level
This sets the amount of attenuation of the volume when the mute
mode is set in the MAIN ZONE.
[Selectable items]
~:
The sound is cut off entirely.
-40dB
The sound is attenuated by 40 dB.
-2OdB
The sound is attenuated by 20 dB.
I:
Use the memorized setting from the last session.
: Always use the muting on condition when power
is turned on.
Set the volume level when the power is turned on
in units of 1 dB.