Volume Limit; Mute Level; Tj Volume Control - Denon AVR-1908 Owner's Manual

ENGLISH
Select the on-screen display's display mode.
Master volume display during adjustment.
Show display for 10 seconds after operation.
Turn display off.
Show display for 10 seconds after operation.
Turn display off.
10see
OFF
1
Osee
OFF
Display Mode
This sets the time the on-screen display is displayed when an operation
is performed.
iPod Information
Master Volume
Tuner Information
This sets the time the on-screen display is displayed when an operation
is performed.
[Selectable items]
ON
I:
Turn display on.
OFF :
Turn display off.
[Selectable items]
Always
Show display continuously.
I
30sec
I:
Show display for 30 seconds after operation.
[Selectable items]
I
Mode1
I:
If there is no video signal, flickering of the on-screen
display is not prevented.
Mode2 :
Prevents flickering of the on-screen display when there is
no video signal.
Use this mode if the on-screen display does not appear
in the Mode 1, as may happen according to the TV being
used.
[Selectable items]
Always
Show display continuously.
I
30sec
I:
Show display for 30 seconds after operation.
OFF :
Turn the screensaver function off.
I •
On-Screen Display
Make on-screen display related settings.
ON :
Activate the screensaver if there is no activity for about 3
minutes.
[Selectable items]
~:
Use this source.
Delete
Do not use this source.
II
Source Delete
Remove input sources that are not used from the display.
Screensaver
-Neii4
• Input sources being used in the various zones cannot be deleted.
• Input sources set to "Delete" cannot be selected using the SOURCE
SELECT knob on the main unit or SOURCE SELECT button on the remote
control unit.
Make screensaver settings.
Use the screensaver to prevent burn-in on the monitor screen.
When set to "ON '; the screensaver is activated if there is no activity
for about 3 minutes.
[Selectable items]
Text
Input source and mode display.
[Selectable items]
ON
I:
Turn display on.
OFF :
Turn display off.
-80dB - +18dB
Set the volume level when the power is turned on
in units of 1 dB.
Make a setting for maximum volume.
Volume Limit
II
Volume Control
Set the main zone volume setting.
[Selectable items]
~:
Do not set a maximum volume.
-2OdB
Set the maximum volume to -20 dB.
-1l1dB
Set the maximum volume to -10 dB.
lIdB
Set the maximum volume to 0 dB.
This sets the volume set when the main zone's power is turned on.
Power On Level
[Selectable items]
Last
I:
Use the memorized setting from the last session.
Always use the muting on condition when power
is turned on.
Mute Level
This sets the amount of attenuation of the volume when the mute
mode is set in the main zone.
[Selectable items]
~:
The sound is cut off entirely.
-40dB
The sound is attenuated by 40 dB.
-20dB
The sound is attenuated by
20
dB.
•
29