Basic Operation; Checking The Sirius Signal Strength And Radio; Presetting Radio Stations (Preset Memory); Listening To Preset Stations - Denon AVR-1909 Owner's Manual

I

Basic Operation

<SOURCE SELECT>
Either turn
1
to select "SIRIUS".
[SOURCE CONTROL 1]
Set to "AUDIO" and
2
CONTROL
2] to "TUNER".
(&page 65 "Remote Control Unit Operations")
TUNING
Use to select the station.
3
When the station is tuned in, the name of the track and artist
are displayed.
~.
• The channel switches continuously when
held.
• SIRIUS Radio stations can be preset using the same procedure as
for FM/AM stations (&page 55 "Presetting Radio Stations (Preset
Memory)" and "Listening to Preset Stations").
*
You cannot perform" Auto Preset".
• The track name, artist name, composer name, category and reception
<STATUS>.
level can be checked by pressing
• The time for which the on-screen display are displayed can be set
at menu "Manual Setup" - "Option Setup" - "On-Screen Display"
(&page 36).
Checking the SIRIUS Signal Strength
and Radio 10
[SAT TU1/2]
or press
Either turn
1
to select "SIRIUS".
[SOURCE
<STATUS>
Press
2
display.
The display will switch as shown below, depending on the
reception conditions.
EXCELLENT
GOOD
WEAK
TUNING
is pressed and
NO SIGNAL
Adjust the position of the antenna until "SIGNAL:
3
EXCELLENT" is shown on the display.
<STATUS>
Press
4
(example: "SR001") is displayed.
TUNING
5 Press
Channel No. and Sirius ID are alternately shown on the display.
*
Write your own SIRIUS ID for storage use.
Sirius ID:
~;
The strength of both the SIRIUS and terrestrial signals can be checked
at menu "Input Setup" - "Antenna Aiming" l(W'page 43).
<SOURCE SELECT> [SAT TU1/2]
or press
until "SIGNAL" appears on the
Signal strength is excellent
Signal strength is good
Signal strength is weak
No signal
until the station you want to check
and select channel 0 (SROOO).
Presetting Radio Stations
(Preset Memory)
Your favorite broadcast stations can be preset so that you can
tune them in easily. Up to 56 stations can be preset.
1
Tune in the broadcast station you want to preset.
2
[MEMORY].
Press
SHIFT
Press to select the block (A to G) in which the
3
station is to be preset.
<PRESET> [CHANNEL +/-]
Press or
4
preset number to 8).
(l
5
[MEMORY]
Press again to complete the setting.
To preset other stations, repeat steps 1 to 5.
IN.h.
Preset stations are erased by overwriting them.

Listening to Preset Stations

1
SHIFT
Press to select the memory block (A to G).
<PRESET> [CHANNEL +/-]
Press or
2
desired preset channel (1 to 8).
ENGLISH
I
to select the
to select the
58