Preparations; Turning The Power; Selecting The Input Source; Operations During Playback - Denon AVR-1909 Owner's Manual

Pia back
• Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<sou~
~l ~
I~OVVER>
<SPEAKERS>
<ON/STANDBY>
( 1
[Front]
-li2-.,,~~,,~~
[OFF]
~ ._.g- .. c p~
[OUICK SELECn
---"-'I
:© © ©:
'a
---;0- 0:
[SOURCE SELECn
.. © .L.©.jQ2,
i·(~Y
l0TVOLU ME
'" G-+-
I ' - ' ' - .' " ' ' ' :
_ " " " . . . . :
[Rear]
:00
:6001
ECT] ~I
[SOURCE SEL
lOOO:
---loJSJ

Preparations

~
BUTTON
..
Turning the Power On
<BUTTON>
..
[BUTTON]
..
<POVVER>.
Press
1
The power indicator lights red and the power is set to the
standby mode.
._--------------_._------------
<ON/STANDBY>
Press
2
The power indicator flashes green and the power turns on.
' *
Also press
turns on. In this case the input source is selected by remote
control unit.
' *
Also press
turns on. In this case Ouick Select is selected.
Turning the Power Off
<ON/STANDBY>
(j)Press
The power is set to the standby mode.
<POWER>.
c.vPress
The power indicator turns off, and so does the power.
-u·n.
[ON/SOURCE]
• Power continues to be supplied to some of the circuitry even when
the power is in the standby mode. When leaving home for long
periods of time or when traveling, either press
the power, or unplug the power cord from the power outlet.
• When the multi-zone power is switched on, and you want to switch
off the main zone power, press
[MASTER
II

Selecting the Input Source

l
[MUTING]
Select the source using
I
<SOURCE SELECT>
Turn
between input sources.
,
If "Rec Select" is selected for the input source, press
before turning
[ON/SOURCE].
or
SOURCE SELECT
when in standby mode, the power
[OUICK SHECn
when in standby mode, the power
[OFF]
or
<POWER>
[OFF].
SOURCE SELECT.
[SOURCE SELECT]
or press
<SOURCE SELECT>.
I

Operations During Playback

Adjusting the Master Volume
<MASTER VOLUME>
Either turn
VOLUME].
[Variable range] ---
_N.n.
The adjustable range will differ depending upon factors such as the
type of input signal and the channel level setting.
Turning Off the Sound Temporarily (Muting)
[MUTING].
Press
,
[MUTING]
To cancel, press
adjusting the master volume.
Listening with Headphones
Plug the headphones into the PHONES jack on the main
unit.
The sound from the speakers and pre-out connectors is automatically
to turn off
cut.
-u·n.
Be careful not to set the volume too high when using headphones.
Switching the front speakers
<SPEAKERS>.
Press
~
FrontA
to switch
~
<SOURCE>
ENGLISH
[MASTER
or press
-80.0dB - +18.0dB
again. Muting can also be canceled by
~
FrontB
-~
FrontA+B
54
I