Download  Print this page

Denon AVR-1905 Operating Instructions Manual

Denon av surround receiver operating instructions avr-1905, avr-785
Hide thumbs

Advertisement

AV SURROUND RECEIVER
RÉCEPTEUR AUDIO-VIDÉO
AVR-1905/785

OPERATING INSTRUCTIONS

MODE D'EMPLOI
FOR ENGLISH READERS
PAGE 2 ~ PAGE
We greatly appreciate your purchase of this unit.
2
To be sure you take maximum advantage of all the
2
features this unit has to offer, read these instructions
carefully and use the set properly. Be sure to keep this
manual for future reference should any questions or
problems arise.
"SERIAL NO.
PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO
THE REAR OF THE CABINET FOR FUTURE REFERENCE"
70, 138 ~ 142
POUR LES LECTEURS FRANCAIS
Nous vous remercions pour l'achat de cet appareil.
2
Pour être sûr de profiter au maximum de toutes les
2
caractéristiques qu'offre cet appareil, lire avec soin ces
instructions et bien utiliser l'appareil. Toujours
conserver ce mode d'emploi pour s'y référer
ultérieurement en cas de question ou de problème.
"NO. DE SERIE
PRIERE DE NOTER LE NUMERO DE SERIE DE L'APPAREIL
INSCRIT A L'ARRIERE DU COFFRET DE FAÇON A POUVOIR
LE CONSULTER EN CAS DE PROBLEME."
PAGE 2, 71 ~ PAGE 142

Advertisement

loading

  Related Manuals for Denon AVR-1905

  Summary of Contents for Denon AVR-1905

  • Page 1: Operating Instructions

    AV SURROUND RECEIVER RÉCEPTEUR AUDIO-VIDÉO AVR-1905/785 OPERATING INSTRUCTIONS MODE D’EMPLOI FOR ENGLISH READERS PAGE 2 ~ PAGE We greatly appreciate your purchase of this unit. To be sure you take maximum advantage of all the features this unit has to offer, read these instructions carefully and use the set properly.
  • Page 2: Safety Precautions

    FCC requirements. Modification not expressly approved by QUALIFIED SERVICE DENON may void your authority, granted by the FCC, to use the product. 3. NOTE This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS Read Instructions – All the safety and operating instructions should be read before the product is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
  • Page 4: Table Of Contents

    INTRODUCTION Thank you for choosing the DENON AVR-1905/785 Digital A / V Surround Receiver. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources.
  • Page 5: Before Using

    • Note that the illustrations in this instructions may differ from the actual set for explanation purposes. • V. AUX terminal The AVR-1905/785’s front panel is equipped with a V. AUX terminal. Remove the cap covering the terminal when you want to use it.
  • Page 6: Features

    96/24, a multi-channel digital signal format developed by Digital Theater Systems Inc. DTS 96/24 sources can be played in the multi-channel mode on the AVR-1905/785 with high sound quality of 96 kHz/24 bits or 88.2 kHz/24 bits. 7. Multi Zone Music Entertainment System Multi Source Function: This unit’s Multi Source function lets you select different audio...
  • Page 7: Connections

    5 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Be sure to connect the left and right channels properly (left with left, right with right). • Insert the plugs securely. Incomplete connections will result in the generation of noise.
  • Page 8: Connecting Video Components

    • When making connections, also refer to the operating instructions of the other components. • The AVR-1905/785 is equipped with a function for up-converting video signals. • The signal connected to the video signal terminal is output to the S-Video and component video monitor out terminals.
  • Page 9 The input selectors for the S inputs and Video inputs work in conjunction with each other. • The AVR-1905/785 is equipped with a function for converting video signals. • The signal connected to the S-Video signal terminal is output to the composite video and component video monitor out terminals.
  • Page 10 When the component video terminals are used to connect the AVR- 1905/785 with a TV (or monitor, projector, etc.) and the video (yellow) or S-Video terminals are used to connect the AVR-1905/785 with a VTR, depending on the combination of the TV and VTR the picture may flicker in the horizontal direction, be distorted, be out of sync not display at all when playing video tapes.
  • Page 11: Connecting The Antenna Terminals

    Connecting the antenna terminals DIRECTION OF BROADCASTING STATION FM INDOOR ANTENNA FM ANTENNA (An Accessory) 75 Ω/ohms COAXIAL CABLE AM LOOP ANTENNA (An Accessory) AM loop antenna assembly Connect to the AM antenna terminals. Remove the vinyl tie Bend in the reverse and take out the direction.
  • Page 12 ENGLISH Connecting the external input (EXT. IN) jacks • These jacks are for inputting multi-channel audio signals from an outboard decoder, or a component with a different type of multi-channel decoder, such as a DVD Audio player, a multi-channel SACD player, or other future multi-channel sound format decoder. •...
  • Page 13 Connecting the MULTI ZONE jacks For instructions on operations using the MULTI ZONE FUNCTIONS. (See page 42 ~ 44) [1] ZONE 2 FIXED OUT CONNECTIONS • If another pre-main (integrated) amplifier is connected, the ZONE2 Fixed-out (variable/fixed level) jacks can be used to play a different program source in ZONE2 the same time.
  • Page 14 If the protection circuit is activated again even though there are no problems with the wiring or the ventilation around the unit, switch off the power and contact a DENON service center. • The protector circuit may be activated if the set is played for long periods of time at high volumes when speakers with an impedance lower than the specified impedance (for example speakers with an impedance of lower than 4 Ω/ohms) are...
  • Page 15 Connections • When making connections, also refer to the operating instructions of the other components. Connection jack for subwoofer with built-in amplifier (super woofer), etc. ( L ) ( R ) FRONT SPEAKER SYSTEMS (B) • Precautions when connecting speakers If a speaker is placed near a TV or video monitor, the colors on the screen may be disturbed by the speaker’s magnetism.
  • Page 16: Part Names And Functions

    ENGLISH 6 PART NAMES AND FUNCTIONS Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). Power ON/STANDBY switch ...(21, 36, 58) Power indicator ...(21, 36) Power switch ...(21, 36) Headphones jack (PHONES) ...(40) INPUT MODE button ...(37, 39) SPEAKER A/B buttons ...(36, 61)
  • Page 17 Remote control unit • For details on the functions of these parts, refer to the pages given in parentheses ( ). LED (indicator) ...(32, 35) ZONE2 buttons ...(44) SURROUND buttons ...(38, 45, 55) Input source selector buttons ...(32~35, 37) System buttons ...(31, 33, 34) SYSTEM SET UP/ SETUP button ...(19, 33, 34) Cursor buttons ...(19, 33, 34, 48)
  • Page 18: Using The Remote Control Unit

    ENGLISH 7 USING THE REMOTE CONTROL UNIT Following the procedure outlined below, insert the batteries before using the remote control unit. Range of operation of the remote control unit Approx. 23 feet/7 m Inserting the batteries q Press as shown by the arrow and slide off. NOTES: •...
  • Page 19: Setting Up The System

    • Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 7 to 15), make the various settings described below on the monitor screen using the AVR-1905/785’s on-screen display function. These settings are required to set up the listening room’s AV system centered around the AVR-1905/785. Use the following buttons to set up the system Set the slide switch to “AUDIO”.
  • Page 20: Speaker System Layout

    • The on-screen display signals are output with priority to the S-VIDEO MONITOR OUT jack during playback of a video component. For example, if the TV monitor is connected to both the AVR-1905/785’s S-Video and video monitor output jacks and signals are input to the AVR- 1905/785 from a video source (VDP, etc.) connected to both the S-Video and video input jacks, the on-screen display signals are output with...
  • Page 21 Before setting up the system Refer to “CONNECTIONS” (pages 7 to 15) and check that all connections are correct. Press the Power switch (button) . • ¢ The power turns on and indicator is light. Set the power switch to this position to turn the power on and off from the included remote control unit. •...
  • Page 22 ENGLISH Setting the type of speakers • Set up in function of your speaker systems. Performing this setup optimizes the system. • The composition of the signals output to the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used.
  • Page 23: Setting The Delay Time

    Setting the delay time • Input the distance between the listening position and the different speakers to set the delay time for the surround mode. Preparations: Measure the distances between the listening position and the speakers (L1 to L5) on the diagram at the right).
  • Page 24 ENGLISH Setting the Subwoofer mode and Crossover Frequency This screen is not displayed when not using a subwoofer. • Set the crossover frequency and subwoofer mode according to the speaker system being used. Select the “Subwoofer Mode”. Select the “Crossover Frequency” mode.
  • Page 25: Setting The Test Tone

    Setting the Test Tone • Use this setting to adjust to that the playback level between the different channel is equal. • From the listening position, listen to the test tones produced from the speakers to adjust the level. • The level can also be adjusted directly from the remote control unit. (For details, see page 45.) •...
  • Page 26: Setting The Digital In Assignment

    5/7 CH STEREO, MONO MOVIE, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MATRIX and VIRTUAL. Setting the Digital In Assignment • This setting assigns the digital input jacks of the AVR-1905/785 for the different input sources. NOTE: • TUNER and V. AUX cannot be selected.
  • Page 27 Setting the Video Input Mode • Set the input signal to be output from the monitor output terminals. Select the input source to be set. Select the mode (input signal). Press the ENTER or AUTO: When there are multiple input signals, the input signals are detected and the input signal to be output from the video monitor output terminal is selected automatically in the following order: component video, S-Video, composite video.
  • Page 28: Setting The Auto Surround Mode

    ENGLISH Setting the Auto Surround Mode For the three kinds of input signals as shown below, the surround mode played the last is stored in the memory. At next time it the same signal inputs, the memorized surround mode is automatically selected and the signal is played. Note that the surround mode setting is also stored separately for the different input function.
  • Page 29 Power Amp Assignment Setting the power amplifier assignment • Make this setting to switch the power amplifier for the surround back channel to ZONE2. • If ZONE2 is selected, the signal that selected at ZONE2 is output at “SURR. BACK/ZONE2” PREOUT terminals. Select “Surround Back”...
  • Page 30 This completes the system setup operations. Once the system is set up, there is no need to make the settings again unless other components or speakers are connected to or the speaker layout is changed. • On-screen display signals Signals input to the AVR-1905/785 VIDEO signal input jack S-video signal input jack...
  • Page 31: Remote Control Unit

    9 REMOTE CONTROL UNIT Operating DENON audio components • Turn on the power of the different components before operating them. Set mode switch 1 to “AUDIO”. Set mode switch 2 to the position for the component to be operated. (CD, CDR/MD or Tape deck) Operate the audio component.
  • Page 32: Preset Memory

    ENGLISH Preset memory DENON and other makes of components can be operated by setting the preset memory. This remote control unit can be used to operate components of other manufacturers without using the learning function by registering the manufacturer of the component as shown on the List of Preset Codes (pages 138~142).
  • Page 33 Some models cannot be operated with this remote control unit. 1. Digital video disc player (DVD) system buttons POWER : Power on/standby (ON/SOURCE) : DENON DVD Power off : Manual search (forward and reverse) : Stop : Play : Auto search...
  • Page 34 NOTES: • For this CD, CDR, MD and TAPE components, buttons can be operated in the same way as for Denon audio components (page 31). • The TV can be operated when the switch is at DVD/VDP, VCR, TV position.
  • Page 35: Punch Through

    Punch Through • “Punch Through” is a function allowing you to operate the PLAY, STOP, MANUAL SEARCH and AUTO SEARCH buttons on the CD, TAPE, CDR/MD, DVD/VDP or VCR components when in the DBS/CABLE or TV mode. By default, nothing is set. Set mode switch 1 to “VIDEO”.
  • Page 36: Operation

    ENGLISH 10 OPERATION Before operating Preparations: Check that all connections are proper. Press the Power switch (button). • ¢ The power turns on and indicator is light. Set the power switch to this position to turn the power on and off from the included remote control unit. •...
  • Page 37 In this mode, the types of signals being input to the digital and analog input jacks for the selected input source are detected and the program in the AVR-1905/785’s surround decoder is selected automatically upon playback. This mode can be selected for all input sources other than TUNER.
  • Page 38 ENGLISH Select the play mode. Press the SURROUND MODE button, then turn the SELECT knob. Example: Stereo SURROUND MODE SELECT (Main unit) To select the surround mode while adjusting the surround parameters, tone defeat or tone control, press the surround mode button then operate the selector.
  • Page 39 (DIRECT, STEREO, STANDARD (DOLBY/DTS SURROUND), 5CH/7CH STEREO or DSP SIMULATION) cannot be selected. Playing audio sources (CDs and DVDs) The AVR-1905/785 is equipped with two 2-channel playback modes exclusively for music. Select the mode to suit your tastes. DIRECT mode Use this mode to achieve good quality 2- channel sound while watching images.
  • Page 40 ENGLISH After starting playback [1] Adjusting the sound quality (tone) The tone control function will not work in the direct mode. The tone switches as follows each time the TONE CONTROL button is pressed. TONE CONTROL (Main unit) With the name of the volume to be adjusted selected, turn the SELECT knob to adjust the level.
  • Page 41 [5] Checking the currently playing program source, etc. On screen display • Each time an operation is performed, a description of that operation appears on the display connected to the unit’s VIDEO MONITOR OUT jack. Also, the unit’s operating status can be checked during playback by pressing the remote control unit’s ON SCREEN/DISPLAY button.
  • Page 42: Remote Control Unit (Rc-978)

    Surround Back Speaker Out cannot be used for MAIN ZONE. • When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the main zone and zone2, the remote-controllable devices in the main zone can be controlled from zone2 using the remote control unit.
  • Page 43 2 When using the SURR.BACK/ZONE2 amplifier as the ZONE2. • The SPEAKER OUT, LINE OUT and PRE OUT terminals can be used simultaneously in ZONE2. • To use the ZONE2, turn on the ZONE2 button (remote control unit). • The output of the ZONE2 SPEAKER OUT terminals can be adjusted with the remote control unit’s ZONE2 VOLUME + and – buttons. System configuration and connections example.
  • Page 44 ENGLISH Multi-source playback [1] Outputting a program source to an amplifier, etc., in a different room (ZONE2 mode) Press the ZONE2/REC SELECT button. The display switches as follows each time the button is pressed. With “ZONE2 SOURCE” displayed, turn the FUNCTION knob and select the source you wish to record.
  • Page 45: Surround

    12 SURROUND Before playing with the surround function • Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 19) or from the remote control unit, as described below. •...
  • Page 46 ENGLISH • After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as (described) below. Select the speaker whose level you want to adjust. The channel switches as shown below each time the button is pressed.
  • Page 47 Dolby Pro Logic x (Pro Logic To play in the PL x mode, set “S. BackSp” at the Speaker Configuration setting to “1Sp” or “2Sp”. To play in the PL x mode, set “Surround Back” at the Power Amp Assign setting. Select the function to which the component you want to play is connected.
  • Page 48 ENGLISH Select the optimum mode for the source. SELECT (Main unit) (Remote control unit) Select the various parameters. (See “Surround parameters q” for a description of the various parameters.) SURROUND PARAMETER (Main unit) (Remote control unit) SELECT (Main unit) When the surround parameters are set using the buttons on the main unit, stop operating buttons after completing the settings. The settings are automatically finalized and the normal display reappears after several seconds.
  • Page 49 DTS NEO:6 mode Select the function to which the component you want to play is connected. Example: DVD FUNCTION (Main unit) Select the DTS NEO:6 mode. STANDARD (Main unit) • The mode switches as shown below each time the button is pressed.
  • Page 50 ENGLISH Select the optimum mode for the source. SELECT (Main unit) MODE cinema Select the various parameters. SURROUND PARAMETER (Main unit) (Remote control unit) Set the various surround parameters. SELECT (Main unit) When the surround parameters are set using the buttons on the main unit, stop operating buttons after completing the settings.
  • Page 51 Dolby Digital mode (only with digital input) and DTS Surround (only with digital input) Select the input source. Playback with a digital input q Select an input source set to digital (COAXIAL/OPTICAL) (see page 26). Example: DVD FUNCTION (Main unit) w Set the input mode to “AUTO”...
  • Page 52 ENGLISH Display the surround parameter menu. SURROUND PARAMETER (Main unit) Select the various parameters. SURROUND PARAMETER (Main unit) (Remote control unit) Adjust the parameter settings. SELECT (Main unit) Press the ENTER button to finish surround parameter mode. (Remote control unit) NOTE: •...
  • Page 53 The input signal can be checked by pressing the remote control unit’s ON SCREEN button. SIGNAL: Displays the type of signal (DTS, DOLBY DIGITAL, PCM, etc.). Displays the input signal’s sampling frequency. FORMAT: Displays the input signal’s number of channels. “Number of front channels/Number of surround channels/LFE on/off”...
  • Page 54: Dsp Surround Simulation

    ENGLISH 13 DSP SURROUND SIMULATION • This unit is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the sound field. One of 7 preset surround modes can be selected according to the program source and the parameters can be adjusted according to the conditions in the listening room to achieve a more realistic, powerful sound.
  • Page 55 DSP surround simulation • To operate the surround mode and surround parameters from the remote control unit. Select the surround mode for the input channel. (Remote control unit) The surround mode switches in the following order each time the DSP SIMULATION button is pressed: MONO MOVIE ROCK ARENA MATRIX...
  • Page 56 ENGLISH • Operating the surround mode and surround parameters from the main unit‘s panel. Turn the SELECT knob to select the surround mode. SELECT (Main unit) • When turned clockwise DIRECT STEREO VIRTUAL SURROUND • When turned counterclockwise DIRECT STEREO VIRTUAL SURROUND To select the surround mode while adjusting the surround parameters, tone defeat or tone control, press the SURROUND MODE button then operate the selector.
  • Page 57: Surround Modes And Parameters

    Surround modes and parameters Mode FRONT L/R CENTER DIRECT STEREO EXTERNAL INPUT DOLBY PRO LOGIC DOLBY PRO LOGIC DTS NEO:6 DOLBY DIGITAL DTS SURROUND 5CH/7CH STEREO ROCK ARENA JAZZ CLUB VIDEO GAME MONO MOVIE MATRIX VIRTUAL C : Signal / Adjustable No signal B : Turned on or off by speaker configuration setting When playing Dolby Digital and DTS signals...
  • Page 58: Listening To The Radio

    ENGLISH 14 LISTENING TO THE RADIO Auto preset memory This unit is equipped with a function for automatically searching for FM broadcast stations and storing them in the preset memory. The “Auto tuner preset” operation can also be performed at “System setup”. (See page 30.) DEFAULT VALUE AUTO TUNER PRESETS A1 ~ A8...
  • Page 59: Auto Tuning

    Auto tuning Set the input source to “TUNER”. FUNCTION (Main unit) Watching the display, press the BAND button to select the desired band (AM or FM). BAND (Main unit) Press the MODE button to set the auto tuning mode. (Remote control unit) Manual tuning Set the input function to “TUNER”.
  • Page 60: Preset Stations

    ENGLISH Preset stations 1, 4 Checking the preset stations • The preset (broadcast) stations can be checked on the on screen display. Press the ON SCREEN/DISPLAY button repeatedly until the “Tuner Preset Stations” screen appears on the OSD. (Remote control unit) Preparations: Use the “Auto tuning”...
  • Page 61: Last Function Memory

    Recalling preset stations 15 LAST FUNCTION MEMORY • This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the power is switched off. This function eliminates the need to perform complicated resettings when the power is switched on. •...
  • Page 62: Additional Information

    The AVR-1905/785 is equipped the function of surround speakers selection that makes it possible to change the settings according to the combination of surround speakers being used and the surrounding environment in order to achieve the ideal surround sound for all sources.
  • Page 63 6.1 channels but also with conventional 2- to 5.1-channel sources. Furthermore, all the Denon original surround modes (see page 54) are compatible with 7.1-channel playback, so you can enjoy 7.1-channel sound with any signal source.
  • Page 64 ENGLISH Speaker setting examples Here we describe a number of speaker settings for different purposes. Use these examples as guides to set up your system according to the type of speakers used and the main usage purpose. 1. DTS-ES compatible system (using surround back speakers) (1) Basic setting for primarily watching movies This is recommended when mainly playing movies and using regular single way or 2-way speakers for the surround speakers.
  • Page 65 Surround The AVR-1905/785 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Dolby Surround (1) Dolby Digital Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories.
  • Page 66: Dts Digital Surround

    AVR-1905/785, or may only produce noise. Before playing DTS signals for the first time, turn down the master volume to a low level, start playing the DTS disc, then check whether the DTS indicator on the AVR-1905/785 (see page 38) lights before turning up the master volume.
  • Page 67 MANUFACTURED UNDER LICENSE FROM DIGITAL THEATER SYSTEMS, INC. U.S. PAT. NO’S. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 AND OTHER U.S. AND WORLD–WIDE PATENTS ISSUED AND PENDING. “DTS”, “DTS–ES”, “Neo:6”, AND “DTS 96/24” ARE TRADEMARKS OF DIGITAL THEATER SYSTEMS, INC. © 1996, 2003 DIGITAL THEATER SYSTEMS, INC.
  • Page 68 ENGLISH DTS 96/24 The sampling frequency, number of bits and number of channels used for recording of music, etc., in studios has been increasing in recent years, and there are a growing number of high quality signal sources, including 96 kHz/24 bit 5.1-channel sources. For example, there are high picture/sound quality DVD video sources with 96 kHz/24 bit stereo PCM audio tracks.
  • Page 69: Troubleshooting

    18 TROUBLESHOOTING If a problem should arise,first check the following. 1. Are the connections correct ? 2. Have you operated the receiver according to the Operating Instructions ? 3. Are the speakers, turntable and other components operating property ? If this unit is not operating properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. Disconnect the power immediately and contact your store of purchase.
  • Page 70: Specifications

    ENGLISH 19 SPECIFICATIONS Audio section • Power amplifier Rated output: Output terminals: • Analog Input sensitivity / input impedance: Frequency response: S/N: Distortion: Rated output: Video section • Standard video jacks Input / output level and impedance: Frequency response: • S-video jacks Input / output level and impedance: Frequency response: •...
  • Page 71 ENGLISH FRANCAIS LIST OF PRESET CODES / LISTE DE CODES PRÉRÉGLÉS Denon 014, *[111] Aiwa Hitachi 006, 011 Konka 012, 013 Magnavox Mitsubishi Panasonic Philips 005, 015, 016, 017 Pioneer 003, 008 Sanyo Sony 002, 019, 020 Toshiba 001, 021, 022...
  • Page 72 Minolta 013, 023 Mitsubishi 001, 003, 008, 013, 014, 017, 027, 029, 039, 040, 041, 045, 097 Motorola Montgomery Ward 001, 002, 007, 009, 049, 063, 081, 115, 117 009, 087, 094 Multitech 007, 009, 011, 087, 090, 094 004, 005, 006, 018, 026, 029, 045, 061, 062, 085 Nikko Noblex...
  • Page 73 ENGLISH FRANCAIS Circuit City Citizen 029, 030, 031, 032, 034, 038, 047, 049, 050, 054, 061, 095, 122, 123 Concerto 031, 047, 049 Colortyme 003, 047, 049, 135 Contec 013, 051, 052, 061 Cony 051, 052, 061 Craig 004, 061 Crown Curtis Mathes 029, 034, 038, 044, 047, 049, 053,...
  • Page 74 Samsung 003, 015, 034, 053, 055, 057, 094, 095, 136, 153 Sansui Sanyo 013, 014, 021, 022, 063, 064, 081, Schneider Scott Sears 008, 014, 021, 022, 023, 024, 025, 040, 052, 057, 062, 063, 064, 065, 073, 075, 076, 097, 098, 125, 159 Sharp 011, 012, 013, 026, 093, 099, 100, 104, 121...
  • Page 75 Sierra III Sony 049, 067 STS1 STS2 STS3 SRS4 Technisat 077, 078, 079, 081, 082 Toshiba 047, 050 Uniden Denon *[111] Aiwa 001, 035, 043 Burmster Carver 003, 035 Emerson 004, 005, 006, 007 Fisher 003, 008, 009, 010 018, 019...
  • Page 76 MEMO:...
  • Page 77 TOKYO, JAPAN www.denon.com Printed in China 511 4178 001...

This manual is also suitable for:

Avr-785sAvr-785Avr-19/78505