Denon AVR-1909 Owner's Manual page 43

i/p Scaler
Make settings for i1p scaler function.
I OVO II HOP II TV/CBL II VCR II V.AUX I
[Input source]
[Selectable items]
I
HI:
A to
Use i1p scaler function for analog video signal.
OFF :
Do not use i1p scaler function.
-u·na
When the "Convert" setting is "OFF'; you cannot set "i1p scaler':
Resolution
Make settings for resolution of HOM I video output signal.
I OVO II HOP II TV/CBL II VCR II V.AUX I
[Input source]
[Selectable items]
I I:
Auto
Detect monitor panel resolution and automatically set
output resolution.
480pJ576p :
Output at 480p/576p resolution
1080i :
Output at 1080i resolution.
720p :
Output at nop resolution.
1080p :
Output at 1080p resolution.
This can be set when "i1p Scaler" is set to "A to H ':
-u·na
• It is not possible to convert" 1080i" signals into "nop" format.
• It is not possible to convert "nop" signals into" 1080i" format.
Progressive Mode
Select optimum progressive mode for video material.
I OVO II HOP II TV/CBL II VCR II V.AUX I
[Input source]
[Selectable items]
Auto :
Automatically detect video material type.
Video1 :
Select mode suitable for video playback.
Video2 :
Select mode suitable for video and 30-frame film material
playback.
This can be set when" i1p Scaler" is set to "A to
Aspect
This sets the aspect ratio when outputting 480i/576i or 480p/576p
input signals from the HDMI output connector.
I OVO II HOP II TV/CBL II VCR II V.AUX I
[Input source]
[Selectable items]
I:
Full
Output at 16:9 aspect ratio.
Normal :
Output at 4:3 aspect ratio.
This can be set when "i1p Scaler" is set to "A to
For details on how to select, set and cancel settings for each menu, see "Menu Operations" ((W'page 22).1
H':
H':
ENGLISH
I
40