Subwoofer Setup; Distance - Denon AVR-1909 Owner's Manual

Surround Speaker
Select surround speakers use and size.
I I
[Selectable items] Large' Small None
Surround Back Speaker
Select surround back speaker use and size.
I I
[Selectable items] ( Large Small
I
(l2spkrs 1spkr )
INti••
Since "Amp Assign" of AVR-1909 is set to "ZONE2" by default,
audio is not output from the surround back speakers. When using the
surround back speakers with MAIN ZONE, change the "Amp Assign"
setting to "7.1 ch" (&page 35).
Large
:Select this when using large speakers with ample low
frequency reproduction capabilities.
Small
:Select this when using small speakers without ample low
frequency reproduction capabilities.
None
:Select this when no speaker is connected.
Yes
:Select this when a subwoofer is connected.
No :
Select this when no subwoofer is connected.
2spkrs 1spkr
Select the number of surround back speakers.
Even when the Surround Back Speaker setting is other than
"None'; sound may not be emitted from the surround back
speaker, depending on the playback source. In this case, make
a menu "Parameter" - "Surround Parameter" - "SB CH Out"
setting other than "OFF" (@"page 48).
- Select "Large" or "Small" not according to the physical size of the
speaker but according to the low frequency reproduction capabilities
based on the frequency set at "Crossover Frequency" (&page
31).
-When "Front Speaker" is set to "Small", "Subwoofer" can
automatically set to "Yes".
-If "Subwoofer" is set to "No", "Front Speaker" is automatically set
to "Large".
None )
-If "Surround Speaker" is set to "None", "Surround Back Speaker"
are automatically set to "None".
- When "Front Speaker" is set to "Small", "Center Speaker" can not
be set to "Large".
- When using just one surround back speaker, connect it to the left
channel (SBU

• Subwoofer Setup

Select low range signal to be reproduced bysubwoofer.
[Selectable items]
I:
LFE
LFE+Main :
~,;
- This can be set when menu "Speaker Configuration" - "Subwoofer"
is set to "Yes".
- Play music or a movie source and select the mode offering the
strongest bass.
- Select "LFE+Main" if you want the bass signals to always be
produced from the subwoofer.
For details on how to select, set and cancel settings for each menu, see "Menu Operations" (Gf'page
Play low range and LFE signal of channels set to
"Small".
Play low range and LFE signal of all channels.
II'Distance
Set distance from listening position to speakers.
Before making-."the •settings, measure thedista"nCe
the
lis"teningcpOsition to aifferent speakers.
Feet / Meters
Select unit for distance.
Step
Select step. (smallest distance)
[Selectable items]
I "I
1ft
o.1ft :
Can be selected when" Feet" is set.
I I
aim O;01m :
Can be selected when "Meters" is set.
Default
Resets the settings to the default values.
Distance measurement
Select the speaker you want to set, then set the distance.
Set the value closest to the measured distance.
[Variable range]
O.Oft - &a.Oft :
Display when "Feet" is set.
0.00m -18.00m :
Display when "Meters" is set.
mg
Set the distance between the listening position and the various
speakers to no more than 20.0 ft (6.00 metersl.
ENGLISH
me
from
I
,~-
22}.1 30