Denon AVR-1909 Owner's Manual page 87

[Video]
cause
Symptom
No picture • The connections between the
appears. AVR-1909 and monitor are faulty.
• The monitor's input setting is
wrong.
• PURE DIRECT mode is set.
• The player is connected using the
component input connectors, the
monitor is connected using the
video (yellow) or S-Video output
con nectors.
Picture cannot be • Input source does not match
recorded. recorder's video
connector (video or S-Video).
DVDs cannot be
copied on a VCR.
On-screen
display is not
shown.
• The operation content display is
"OFF':
• The main volume display is
"OFF':
• The display during tuner operation
is "OFF':
• The display during iPod operation
is "OFF':
COuntenneasure
• Check the connections.
• Set properly.
• Cancel the PURE DIRECT mode.
• High definition (1080i/720p) and
progressive (480p/576p) video
signals are not down-converted.
Set the player to interlace
(480i/576i) signals.
• The video conversion function
connection does not work for the REC
OUT connectors. Match
input source and recorder
connections.
• This is not a malfunction. Most
movie software includes copy
prevention signals and cannot be
copied.
• When viewing HDMI
component video signals via the
AVR-1909, the on-screen display
MENU
appears when the button
A.MENU
on the main unit or the
button on the main remote
control unit.
• When only HDMI or component
video signals are input to the
AVR-1909, the characters
the on-screen display are not
displayed over the picture.
• Set "Manual Setup" - "Option
Setup" - "On-Screen Display"
- "Text" to "ON':
• Set "Manual Setup" - "Option
Setup" - "On-Screen Display"
- "Master Volume" to "ON':
• Set when "Manual Setup"
- "On-Screen Display" - "Tuner
Information"is not "OFF':
• Set when "Manual Setup"
- "On-Screen Display" - " iPod
Information" is not "OFF':
[HDMI]
Page
Symptom
12 - 16 HDMI audio
• The "Manual Setup" - "HDMI • Set to "Amp"
signals are not
output from
speakers.
46
No picture • The connections to the HDMI • Check the connections.
appears
with HDMI
• HDMI input setting is improper.
connections. • The monitor is not compatible • Connect
15
the
• The HDMI format of the player • Match the HDMI format of the
No sound is .The
output from
the monitor
connected
with HDMI
connections.
9
or
When performing
• HDMI's
the following
operations on a
connected device,
AVR-1909 has the
same operations.
9 · Power ON/OFF
·Switching audio
of
output devices
·Adjust volume
·Switch input
36
source
36
36
36
cause
Countenneasure
Setup " "HDMI Audio Out"
-
setting is set to"TV"
connectors are faulty.
• Check the HDMI input setting.
with copyright protection compatible
(HDCP)
protection (HDCP).
and monitor do not match. player and monitor.
"Manual Setup" - "HDMI • Set to "TV':
" "HDMI Audio Out"
Setup -
setting is set to "Amp':
CEC function is • Set "Manual Setup" - "HDMI
operating. Setup" -
"OFF"
When you only want to operate
the power on/off each device, set
"Power Off Control" to "OFF':
ENGLISH
Page
'"
32
~
I - -
i
I
I
i
12
I
i
r--;
42
a monitor that is 12
I I
I
I ."
with copyright
r-:;;-
I
~
12
I
I
32
r-;;-
I '"
I
I
;;r
I
: ~
;:;
2.
32
"HDMI Control" to
84
C>
' "
~
3'
., ~
~
~
()
g
"
~
g.
~
... '"
l::
_
~
3
0