Multi-Zone; External Controller - Denon AVR-1909 Owner's Manual

I

Multi-zone

ZONE2 out Connections
If another pre-main (integrated) amplifier is connected, the ZONE2 out connectors can be used to playa
different program source in ZONE2 at the same time (Gr'page 69 -
AUX
OUT
Infrared tr.=====~~~
~I:~~~~~IB!
retransmitter
-N·n•
• For the audio output, use high quality pin-plug cords so that no induction humming or noise is produced.
• For instructions on installing and operating separately sold devices, refer to the respective devices'
operating instructions .
• To conduct multi-zone playback, see" Amp Assign
69 -
72)
72).
Pre-main amplifier
(ZONE2)
-AUDIO-
AUDIO
IN
L R
~~
Extension jack for future use.
(Connect devices corresponding with room to
room function to this jack.)
Input
Infrared
sensor
I
Multi-zone Connections and Operations"
ntroller
RF remote receiver
I l
• When using in combination with an RF Remote Controller (RC-7000CI, sold separately) or RF Remote
Receiver (RC-7001 RCI, sold separately) two-way communica ion with an RF Remote Controller is
possible
The AVR-1909's status information as well as iPod can be browsed watching the RF Remote Controller's
display. For details, refer to the operating instructions of the respective devices.
• When used in combination with an RF Remote Controller or RF Remote Receiver, make the settings at
menu "Manual Setup" - "Option Setup" - "2Way Remote" - "Used"
(~page
ENGLISH
I
r
(~page
36).
20