Multi-Zone; External Controller; Connecting The Power Cord; Once Connections Are Completed - Denon AVR-1909 Owner's Manual

ENGLISH

Multi-zone

ZONE2 out Connections
If another pre-main (integrated) amplifier is connected, the ZONE2 out
connectors can be used to play a different program source in ZONE2
at the same time (vpage 60 ~ 62).
Pre-main amplifier
(ZONE2)
R
L
Extension jack for future use.
R (Connect devices corresponding with
L
room to room function to this jack.)
Input Output
Infrared
retransmitter
NOTE
• For the audio output, use high quality pin-plug cords so that no
induction humming or noise is produced.
• For instructions on installing and operating separately sold devices,
refer to the respective devices' operating instructions.
• To conduct multi-zone playback, see "Amp Assign / Multi-zone
Connections and Operations" (vpage 60 ~ 62).


External Controller

RF remote receiver
• When using in combination with an RF Remote Controller (RC-
7000CI, sold separately) or RF Remote Receiver (RC-7001RCI, sold
separately) two-way communication with an RF Remote Controller
Infrared
is possible.
sensor
The AVR-1909's status information as well as iPod can be browsed
watching the RF Remote Controller's display. For details, refer to the
operating instructions of the respective devices.
• When used in combination with an RF Remote Controller or RF
Remote Receiver, make the settings at menu "Manual Setup"
– "Option Setup" – "2Way Remote" – "Used" (vpage 31).

Connecting the Power Cord

Wait until all connections have been completed before connecting the
power cord.
Power cord
(supplied)
Connection to the AC outlet
• This outlet supply power to external audio
devices.
• The power supplied from this outlet turns on
and off together with the set's power switch.
• Audio equipment
consumption of 100 W (0.43 A) can be
connected.
NOTE
• Insert the AC plugs securely. Incomplete connections could cause
noise.
• Only use the AC outlet to plug in audio equipment. Do not use
them as power supplies for hairdryers or anything other than audio
equipment.
Once Connections are
Completed
Turning the Power On
(vpage 46)
To household
power outlet
(AC 230 V, 50 Hz)
with a total power