Auto-Scan Mode; Auto-Scan Time Interval; Console Lock In Osd: <F3 - D-Link KVM-440 User Manual

7.4.3. Auto-scan Mode

There are two auto-scan modes, please refer section 7.3.1 Setup in
OSD – Scan Mode to set up the auto-scan mode.
Scan all computers which are power on.
Scan all computers which are marked for auto-scan.

7.4.4. Auto-scan Time Interval

The auto-scan time interval of each port displayed can be adjusted by
pressing <F1> from the OSD main menu. Please refer section 7.3.2 Setup
in OSD – Scan Time.
7.5. Console Lock in OSD: <F3>
If the security mode is enabled in OSD mode (by pressing <F5> in OSD mode,
please refer section 7.7 Security Setup in OSD). You can logout to lock the
console by pressing <F3> In OSD mode. The Console Lock Banner will be
shown on the screen.
The KVM will be locked until an authorized user logs in.
Note: When outside of OSD mode you can also log out to lock the console via
hotkey using <Scroll Lock> → <Scroll Lock> → <H> → <Enter>.
Please refer section 6.7 Console Lock.
Note: If you forget the password, the only way to permanently
disable the security function is to key in a universal password to
unlock the KVM. You need to key in this unlock password to unlock
the KVM, and then you can reinitialize the system. Please contact
your agency/distributor to obtain the universal password.
Figure 23: Console Lock Banner
Figure 24: Unlock window
26