Changing The Language; Returning To Default Operation - Inter-Tel 8662 User Manual

Changing the Language

When your telephone system is installed, the system administrator can choose two of
four different languages (American English, British English, Spanish, or Japanese*)
as the primary and secondary languages. You can then change the display and voice
mail prompts on your endpoint by toggling between the primary and secondary lan-
guages. For example, if the system's primary language is American English, and your
endpoint is programmed for the primary language, all displays appear in American
English, and your voice mail prompts are played in American English (unless
changed, as described below).
*Japanese characters are not supported on this endpoint model.
NOTE:
You can only use the secondary language voice mail prompts if they are
loaded on the system. By default, all endpoints are set for the primary language. See
your system administrator to determine which languages are programmed for your tele-
phone system.
To change the assigned language for your endpoint:
Dial
3 0
as desired. Your display shows the current language.

Returning to Default Operation

You can return your endpoint to default levels at any time. This feature returns vol-
umes to default levels; cancels DND, manual call forwarding, background music, and
queue requests; and restores handsfree mode, pages, hunt group calls, and system for-
warding all at once.
To return your endpoint to default:
Dial
3 9
NOTE:
See
46
to change between your system's primary and secondary languages,
1
.
4
page 44 for instructions on changing volume levels.
®
Inter-Tel Model 8662 User Guide (ITP Mode)