Coolant; Check The Level - Beta EVO 4T Owner's Manual

4
GB
- Extract the paper fi lter using pliers. Check
the condition of the O-ring too, and
replace it if necessary.
Change the fi lter and refi t the cover,
tightening the three M6x20 bolts to 10
Nm.
- Pour in the quantity of oil indicated on
page 10.
- Use the oil indicated on page 18
in the "Recommended lubricants and
liquids" table.
- Close the fi ller cap 1.
WARNING:
Hot oil can cause severe burns!

COOLANT

CHECK THE LEVEL

Keep the vehicle in vertical position relative
to the ground.
The level of the coolant must be checked
when the engine is cold. Use the following
procedure:
1
Unscrew cap 1 and ensure that the liquid
is visible in the lower portion of the load-
ing tube.
Where the liquid is not visible in the lower
part of the loading tube position the vehicle
as in the fi gure and then top up.
Use the liquid indicated on page 18 in
the "Recommended lubricants and liquids"
table.
36