Brakes; Front Brake; Rear Brake - Beta EVO 4T Owner's Manual

3
1
2
GB

BRAKES

FRONT BRAKE

The front brake is disk type with hydraulic
control.
The position of the lever is controlled
through the use of register 1.
2
Once the position of the lever has been
changed, register 2 must be changed to
restore the initial correct clearance.
WARNING: reduced play causes brake
overheating leading to sudden lockup.

REAR BRAKE

The rear brake is disk type with hydraulic
control. You may adjust pedal height by
means of register 1.
1
Once you change the original pedal po-
sition you need to modify regulator 2 on
the brake pump to allow you to reset the
correct pump travel.
WARNING: reduced play causes brake
overheating leading to sudden lockup.
28