Liquid Coolant; Check The Level - Beta X-Trainer 300 2T User Manual

Screw on fi ller cap 1 again.
WARNING:
Hot oil can cause severe burns!
Wear appropriate protective clothing and
protection gloves.
In case of burns, rinse immediately with
lukewarm water the affected area.
WARNING:
Dispose of used oil in compliance with the
regulations in force.

LIQUID COOLANT

CHECK THE LEVEL

Keep the vehicle in vertical position relative
to the ground.
The level of the coolant must be checked
when the engine is cold. Use the following
procedure:
- Unscrew cap 1 and ensure that the liquid
is visible in the lower portion of the load-
ing tube.
- In the case in which the liquid is not visible
remove the vent screw 2 and proceed
topping up.
- At the end of operation refi t the fi ller cap
and the vent screw.
Use the oil indicated on page 16 in the
"Recommended lubricants and liquids"
table.
WARNING:
Never unscrew the fi ller cap of the radiator
when the engine is hot. Danger of burning!
1
1
41
4
2
GB