Honeywell UMC800 Installation And User Manual page 86

Maintenance
Replacement Procedures
Step
18
Reconnect power wiring to proper terminals on power supply as shown.
19
Replace front cover and secure with two screws.
20
Restore power to controller.
21
Verify configuration.
Perform calibration of AI modules and CJC references (if using T/C) for all channels if greater
than 0.1 % accuracy is required.
78
Hot
Neutral
Ground
UMC800 Controller Installation and User Guide
Action
F 3,15 AT
250V
L1
L2 / N
Release F
4/01