Ricoh K-C3 Service Manual page 173

B245/B276/B277/B268/B269 Service Manual
Memory/Version/PN
7801
Memory/Version (BICU)
7801 2
Displays the version of the BICU board
Memory/Version (ADF)
7801 5
Displays the P/N and suffix of the ADF ROM.
Memory/Version (Printer/Scanner)
7801 15
Displays the P/N and suffix of the Printer/Scanner ROM.
Display–PM Count
7803*
7803 1 Displays the PM counter.
Reset–PM Counter
7804
Resets the PM counter (SP 7803 1). When the program ends normally, the
7804 1
message "Completed" is displayed.
Reset–SC/Jam Counters
7807
Resets the SC, paper, original, and total jam counters. When the program ends
normally, the message "Completed" is displayed. SP 7807 1 does not reset the
7807 1
following logs: SP 7507 (Display-Paper Jam History) and SP 7508
(Display-Original Jam History).
Reset–Counters
7808
Resets all counters except for the management counters. The management
counters are the counters that are not changed by NVRAM Download (SP 5825
7808 1
1) When the program ends normally, the message the message "Completed" is
displayed.
Reset–Key Op Code
7810
Resets the key operator code. Use SP 7810 1 when the customer has forgotten
the key-operator code. When the program ends normally, the message
"Completed" is displayed, if the program ends abnormally, an error message is
7810 1
displayed. If the customer forgets the key operator code. To specify a new
key-operator code, use the User Tools: System Settings
Key Operator Code On Enter Key Operator Code.
18-Jan-06
Key Operator Tools
164