Ricoh K-C3 Service Manual page 124

B245/B276/B277/B268/B269 Service Manual
B: Side-to-side registration
Make a temporary test chart as shown above, using A3/11" x 17" paper.
1. Place the temporary test chart on the ADF and make a copy from one of the feed
stations.
2. Check the registrations, and adjust as necessary with the appropriate SP modes,
as follows.
Side-to-side registration
Leading edge registration
Blank margin for the trailing edge
Side-to-side registration (Duplex: back side)
- Sub-scan Magnification -
A: Sub-scan magnification
Make a temporary test chart as shown above, with A3/11" x 17" paper.
1. Place the temporary test chart on the ADF and make a copy from one of the feed
stations.
2. Check the registration, and if necessary adjust it with SP 6006 5. The specification
is 1.0%.
18-Jan-06
SP mode
SP 6006 1
SP 6006 2
SP 6006 3
SP 6006 4
115