Ricoh K-C3 Service Manual page 118

B245/B276/B277/B268/B269 Service Manual
2. PCU ( p.76)
This step releases the gear (on the gearbox) that drives the PCU.
Ground plate [E] (
Gearbox [F] (
Do not change the position of the spring [G] and make sure that the bushing [H] on the PCU
drive shaft is in the correct position you when you reassemble. You can adjust its position by
rotating the gear [I] seen from the opening of the gearbox.
x 2)
x 5, 1 belt)
18-Jan-06
109