Ricoh K-C3 Service Manual page 149

B245/B276/B277/B268/B269 Service Manual
4. While holding down the [Enter] key, press the [1] key (on the numeric
keypad).
5. While holding down the [Enter] key, press the "OK" key.
Selecting Programs
When a blinking underscore (or several blinking underscores) shows, you can type a
number from the numeric keypad [D].
When the sign "
menu by pressing the left-arrow key [B] or the right-arrow key [C]. To select a program,
press the "OK" key [F].
Specifying Values
1. After locating a program, press the "OK" key. A blinking underscore (or
several blinking underscores) indicates which value you can change. The
value in parentheses is the default value of the menu.
2. Type a necessary value from the numeric keypad. To switch between
positive (plus) and negative (minus) values, press the [./*] (period/asterisk)
key.
3. To validate the value, press the "OK" key. To cancel the value, press the
cancel key [E].
Activating Copy Mode
You can activate the copy mode while the SP mode is running. When you do so, the copier
outputs images or patterns that help you adjust the SP-mode program.
1. Press the key. The copy mode is activated.
2. Specify copy settings and press the "OK" key.
3. To return to the SP mode, press the
You cannot end the SP mode while the copy mode is activated.
Quitting Programs/Ending (S)SP Mode
Press the key or the "Cancel" key to quit the program. You can end the SP mode by
pressing one of these keys several times.
/OK" [A] shows in the upper right corner, you can scroll through the
key.
18-Jan-06
140