Lucent Technologies CALLMASTER User Manual page 9

CALLMASTER® V Telephone Console User's Guide 555-233-735
Call-Handling Features
The green light next to the button goes off.
CONFERENCE
The Conference feature allows you to conference up to six parties (including
yourself) on a call.
To add another party to a call (for a total of six parties)
1. Press
2. Dial the number of the new party and wait for an answer.
3. When you want to add the new person, press
again.
4. Repeat Steps 1 through 3 for additional conference connections.
To add a call you have put on hold to another call you are connected to
1. Press
2. Press the call appearance button of the call on hold (first call).
3. Press
To drop the last person added to the conference call
1. With a display: Press the Menu button and then press the softkey
below Drop.
Without a display: Press the
HOLD
The Hold feature puts a call on hold until you can return to it.
To put a call on hold while you answer another call or perform another
task
1. Press
To answer a new call while active on another
1. Press
2. Press the call appearance button of the incoming call.
To return to the held call
1. Press the call appearance button of the held call.
REDIAL
The Redial (or Last Number Dialed) feature automatically redials the last
extension or outside number (up to 24 digits) you dialed.
To redial the last number that you dialed
1. Press
Redial
)
(or
Conf
)
(or
Conf
)
(or
Conf
)
(or
Hold
)
(or
Hold
)
(or
. [dial tone]
. [dial tone]
again.
button (if administered).
Drop
.
.
.
)
(or
Conf
Issue 1
5