Barco ImagePRO-II Specifications page 6

Dual output model
The optional dual output card turns your ImagePRO-II into an even more powerful tool.
By providing an additional scaled output, the same input can be routed to two separate
outputs doubling the output capability of your ImagePRO-II, as illustrated below. The
dual output mezzanine includes three additional HD/3G SDI connectors supporting the
input, loop and output signals. Each output can be configured independently to its own
resolution, frame rate, AOI, effects or pan and zoom.
HDMI output*
1,920 x 1,080p
* Any valid combination of formats and resolutions is allowed to fit the specific
application requirements
LED application with ImagePRO-II dual
2,048 x 1,080
S3D conversions with ImagePRO-II dual
ImagePRO-II dual supports converting stereoscopic 3D (S3D) sources to alternate S3D signal formats for single
or dual stream stereoscopic S3D inputs and outputs. Multiple output connectors can be active at the same
time, depending on the selected 3D output format and resolution. S3D sync input and output support is
provided by two miniDIN-3 connectors per VESA 3D specification.
INPUT
• Side-by-side horizontal
• Left and right
• Top and bottom
SDI output*
NTSC (480i) or
PAL (575i)
1,280 x 1,024 1,280 x 1,024
OUTPUT
• Side-by-side horizontal
• Left and right
• Top and bottom
LED 1 LED 2