Auto Power; Factory Reset; Ota Upgrade; System Information - Triax CR 310 User Manual

Digital cable receiver

Table of Contents

Menu Guide

System Setting

16. Auto Power

1. If the Auto Power is set to On and power is off, the Set turns on

automatically and turns into the channel mode which you were watching

before power breakdown.

2. If the Auto Power is set to Off and power is off, the Set turns into the

standby mode.

Use this option only if you have to start the complete

installation procedure from scratch. If you continue from here, all your previous

settings and all channels will be cleared !

The default data will be loaded.

If you press OK button, it asks for your confirmation.

If you want to reset, press OK button, or press EXIT button to exit this menu.

To set up OTA Upgrade.

It is possible to set up OTA upgrade manually.

Please check if there is new software as pressing OK button after entering

Frequency, Symbol Rate, Const..

Updated software will be downloaded.

To set up Option.

Select Option, then select Do not upgrade, Auto upgrade or Auto upgrade with

notify.

• Do not upgrade

• Auto Upgrade : If there is new software, upgrade will be done automatically.

• Auto Upgrade with notify : If there is new software, pop-up window will be

shown. The user can select Upgrade or not.

Displays the system information :

MODEL name, Last Update, S/W, H/W, Loader version, C.A.

Table of Contents