Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Triax DVB 63S
Summary of Contents for Triax DVB 63S
- Page 1 TRIAX DVB 63S/65S Users Manual TRIAX...
-
Page 2: Safety Instructions
INTROD U CTI ON Safety Instructions For your own safety, please read the Safety Instructions carefully be- fore putting your new receiver into operation. The manufacturer is not liable for damage caused by unauthorised handling or by non-compliance with the safety instructions. Do not place anything on top of the equipment as this would cover the ventilation slots allowing the heat to escape. -
Page 3: Table Of Contents
Contents ... 3 Set-up and connections ... 4 Connection of a DVB-receiver to a satellite system ... 5 Conditional Access ... 5 Operation of TRIAX SR 50/55 via RC65 ... 6 Mains connection ... 6 Outdoor unit ... 6 Connection ... 6 Setting of UHF-output channel ... -
Page 4: Set-Up And Connections
SET-UP AND CONNECTIONS Helpful Hints With the so-called “On Screen Display” the operation of the re- ceiver is simplified, and the number of remote control keys mini- mised. All functions are displayed on the screen and can be con- trolled by means of a few buttons. Connected functions are compiled as “MENUS”. -
Page 5: Connection Of A Dvb-Receiver To A Satellite System
Connection of a DVB-receiver to a satellite system Connect the LNB to the LNB-input (LNB IN) on the DVB-re- ceiver Connect the LNB-output (LNB OUT) on the DVB-receiver to the LNB-input on the analog receiver Mains connection Connect the terrestrial aerial to the aerial input (RF IN) on the DVB-receiver Scart-connection of an analog receiver to Input AUX of the Scart-connection of a VCR to the VCR-scart-socket of the... -
Page 6: Operation Of Triax Sr 50/55 Via Rc65
SET-UP AND CONNECTIONS Operation of TRIAX SR50/SR55 via RC65 The standard remote control for TRIAX DVB65S is RC65. This RC65 has the option to operate the analogue receivers TRIAX SR50 and SR55. The factory programming of RC65 is to be a sin- gle mode RC for DVB63S/65S only, ie the button SAT2 has no function. - Page 7 Connection to a TV set By means of a SCART cable: To have the best possible picture quality you should connect re- ceiver and tv by means of a SCART cable. Procedure: Connect receiver (SCART-socket tv) and tv (SCART-socket) by means of a SCART-cable. If your tv is equipped accord- ingly, this will automatically shift to AV and thus to satellite reception when switching on the receiver.
-
Page 8: Setting Of Uhf-Output Channel
SET-UP AND CONNECTIONS Setting of the UHF-output channel Main menu > Settings > Settings > Audio/Video Follow this procedure: Call up the main menu by means of the menu button. Now select the menu line Settings, by marking the corre- sponding line by means of the cursor. -
Page 9: Vcr / Super Vhs-Vcr
receiver, and the receiver now transmits on the channel shown. If interference-free reception is still not possible on this channel, you must repeat the procdure until a suitable chan- nel is found. When an optimum UHF-channel has been found, be sure to store this on your tv. -
Page 10: Serial Port /Usb
NOTE! TRIAX DVB 63S has no build-in modem. TRIAX-link With TRIAX DVB 63S/65S you can extend the operation also to include operation from another room. The only thing you need is a simple TRIAX-link receiver. -
Page 11: Setting
Settings When you have connected your new receiver and put it into service, you can optimise the receiver to your own needs. OSD-language Under this menu you can set the menu language according to your own choice to the languages German, English, French, Italian, Turkish, Norwegian, Finnish, Danish, Swed- ish and Spanish. -
Page 12: Basis Setting
SETTINGS Basic setting Other basic settings Confirm with OK. The menu basic setting (basis) appears. With the cursor buttons up/down you can move the cursor within the menu. When selecting a menu, you must observe the screen insertions. Store by pressing OK. The back-button takes you back to the main menu. -
Page 13: Parental Lock
Settings > Basis Parental lock: Your receiver is provided with a parental lock. Programs locked (see page 25) can thus only be set after entering a 4-digit PIN- No. On this line you can set or cancel the parental lock by means of the OK-button. Time difference GMT (hrs.): Your receiver is provided with a timer, being synchronised via satellite reception accord-... -
Page 14: Installation
SETTINGS Settings > Basis UHF-output channel See page 7. SCART-mode: In this line set by means of the OK-button in ac- cordance with your tv FBAS, RGB or S-VHS. For standard-tv you let the setting RGB remain. Subtitling: In this line set by means of the OK-button you can select subtitle on or off. - Page 15 > Settings > LNB The following settings can be made in this sub-menu: DiSEqC on/off DiSEqC (see Chapter Technical Terms) is used for the control of major aerial systems. On this line the DiSEqC is switched on/off by means of the OK-button. Setting of matrix switch and LNB-features The menu lists the 4 switch criteria of DiSE- qC-control.
- Page 16 SETTINGS > Settings > LNB Now edit the menu > Settings > LNB until the indications of this menu correspond the indica- tions of your receiver. Set no satellite for the switch criteria not required. Additional Settings Having set the matrix-switch of your DVB-receiver of your receiver system, you must now test and if necessary correct the additional settings of your receiver system.
- Page 17 SETTINGS Test-Transponder The following sub-entries of this menu only have to be entered if you want to test a satellite signal from a satellite (User 1 to 17) which has been en- tered by yourself. Transponder frequency: Enter in this line by means of the numeric keys a frequency at which digital programs are being transmitted.
-
Page 18: Program Search
SETTINGS Program search As already mentioned, your receiver has been pre-programmed for the reception from the satel- lites ASTRA and EUTELSAT. You have several op- tions for program search in order to be able to re- ceive new programs or programs from other sat- ellites. - Page 19 SETTINGS Search > Satellite Under this menu item you can make a search for a special satellite. In that case all other satellites are not being searched. Select the menu line satellite by marking it by means of the cursor-button. Confirm with OK.
- Page 20 SETTINGS Symbol rate: The symbol rate describes the number of data transmitted per second, e.g. 27000 (27000 sym- bols per second). Enter the corresponding symbol rate by means of the numeric keys. When you have completed all enterings, you start searching by marking up the line start search in red colour and confirm by pressing the OK-but- ton.
-
Page 21: Resetting Factory Pre-Setting
SETTINGS Resetting factory pre-setting Delete all program memory You can reset the factory pre-set LNB-setting at any time. If the program list is out of date due to changes by the program providers, you all also delete completely and then make a new search. Call up the main menu by means of the menu- button. -
Page 22: System Configuration
SETTINGS System configuration This sub-menu displays the specific data of the equipment. Mark up this line in the sub-menu Settings by means of the cursor-button. Confirm with OK. The back-button or the menu-button will allow you to exit from the menu. Change of basic programming If you are not satisfied with the pre-programming of your receiver you can change the program list... - Page 23 SETTINGS Here all packages with corresponding programs are listed. Already existing programs are dis- played in white colour, just found programs in red colour. Programs which already are in the user’s list are provided with a red cross. Encoded pro- grams are marked with a key.
-
Page 24: Sorting Of Programs
SETTINGS Sorting of programs To sort the user’s program list to suit your needs, proceed as follows: Call up the main menu by means of the menu- button. Now mark up the line tv-programs by means of the cursor-button to sort tv-programs, or radio programs to sort radio programs. -
Page 25: Locking Of Programs
SETTINGS Locking of programs If you wish so, you can lock programs. A locked program will not be displayed on the screen, until after setting the program you have entered your personal PIN-number. Once this number has been entered, the lock will remain cancelled until the receiver is switched off again (Standby) To lock a program, proceed as follows: Call up the main menu by pressing the menu-... -
Page 26: Alteration Of Pin
SETTINGS Change of PIN The PIN-number has been factory pre-set at 0000. To activate the program lock you must in stead of the factory pre-setting enter your person- al PIN-number. NB ! Do not forget the PIN-number. In case, how- ever, that you should forget it, please contact your tv-retailer ! To change the PIN-number, proceed as follows:... -
Page 27: Update Of Software
Software TRIAX A/S has the right of ownership of the soft- ware. As the owner of DVB 63S/65S you have the right to apply the software for this equipment. No kind of re-engineering or copying of the soft- ware for other purposes must be made without a written permission from TRIAX A/S. -
Page 28: Operation
OPERATION Power ON/OFF Switch on the receiver by pressing the ON/OFF button of the receiver or remote control. When you again press the ON/OFF button of the receiver or remote control, the receiver is switched off. The receiver is now in standby mode, and the dis- play shows the time. -
Page 29: Infobox
By means of the program list: Press the List-button. A program list now appears. In tv-mode only tv-programs appear, and in radio- mode only radio programs. The actually set pro- gram appears in blue colour. Now you can mark up red the program wanted by means of the cursor- button. -
Page 30: Volume Control
OPERATION Volume control You can control the volume of your receiver. This facilitates the use of the receiver as in this way you have all important functions in your remote control and thus only seldom have to use the re- move control of your tv. -
Page 31: Switch Between Tv/Radio
OPERATION Switch between tv/radio Besides tv-programs, the pre-programming also includes radio programes. In this case the tv-pic- ture is not displayed, but only the name of the program. Switch-over to radio reception by means of the button tv/radio. The receiver now switches over to the radio pro- gram you listened to last. -
Page 32: Videotext
OPERATION Video text If transmitted, the video text is displayed on your tv. Use the remote control of your tv to operate video text. In case of disturbances on your tv, like e.g. interference of video text and picture, you must set your receiver to CVBS-operation. -
Page 33: Timer
OPERATION survey of the program of today on the different channels too. Press ”green” to recall this survey. Booking by means of EPG In all EPG menu’s, you can book any program shown just by means of moving the cursor to the program and pressing ”OK”. -
Page 34: Trouble Shooting
TROUBLE SHOOTING Trouble Shooting What is the problem No picture, no sound, no display No mains voltage No picture, no sound, display on Short-circuit in LNB-supply In the picture small square boxes (small bricks) arise periodically. Periodically the receiver switch- es to still image - no sound. -
Page 35: Technical Terms
Aerial cable: Connecting cable between the modula- tor of the satellite receiver and the aerial input of the tv, as an alternative if there is no SCART-socket. AV: see SCART Coaxial cable: Connecting cable between LNB and satellite receiver, for the transmission of signals received and power supply of the LNB. - Page 36 TECHNICAL TERMS Modulator Circuit in the satellite receiver or the VCR, for connection to the tv by means of an aerial cable. Mode determines whether a mono or stereo program is received. Multifeed: ODU, consisting of a dish and several LNBs for the reception from several sat- ellites.
-
Page 37: Technical Specifications
DBS-Tuner Input frequency range Input level range Noise level DBS tuner input Input impedance Output for 1. IF Output impedance IF-wideband tuner AFC-capture bandwidth Demodulation Symbol rate Viterbi rates: Roll-off Factor Demultiplexing: Demultiplexing Video decoding: Video: Video standard Active picture surface Picture aspect ratio Picture material 16:9 Audio:... - Page 38 TECHNICAL SPECIFICATIONS AUX-SCART: Input Output: Serial port RS 232: Type Bitrate Connector Function USB port: Type: Bitrate Connector Function Modem: Type: Modem approval: The European Telecommunications Standards Institute is recognised according to Council Directive 83/189/EEC of 28 March 1983 laying down a procedure for the provi- sion of information in the field of technical standards and regulations.
- Page 39 Remote control system: Sub-system addresse Modulation frequency: Infrared wave length Power supply: Power input: Input voltage: General Ambient temperature: Air humidity Dimensions: (wxdxh) Weight: TECHNICAL SPECIFICATIONS RC-5 8 (SAT 1) 36 kHz 950 nm Mains connection <29 W (in operation, horizontal polarisa- tion / 400 mA LNB current) <20 W (in operation, without LNB) <...
-
Page 40: Program List
(option) On/off Teletext size Language set. SAT/Terr.TV Program +/- cursor op/down BLUE TV/Radio SAT1 mode = TRIAX DVB65/63 Aerial Connector to input analogue RX AERIAL AUX IN/OUT AUDIO OUT DOLBY DIGITAL/PCM To aerial Optical Digital/ input on output...