Channel Search; Automatic Search - Triax CR 310 User Manual

Menu Guide

Channel Search

18
Select Automatic/Manual channel search in main menu.

Automatic Search

1. Press Automatic Search in Main Menu.
2. Input a proper Start Frequency of the cable signal using NUMERIC buttons.
3. Input a proper End Frequency of the cable signal using NUMERIC buttons.
4. Input a proper Symbol Rate of the cable signal using NUMERIC buttons.
5. Select the Constellation(AUTO, 16, 32, 64, 128 or 256 QAM) using
or buttons.
6. Press OK button.
7 . When searching is started, the name of channels searched will
be displayed on the screen.
8. When searching is finished, the "Search finished"message will be
displayed on the center of the screen.
9. Press the OK button to save the channel list and watch the channel
searched.