Introduction; Safety Information; Power Cord; Receiver - Triax S-209CX User Manual

Safety Information

Important
- Read these instructions fully before installing or operating

Introduction

• Read this manual thoroughly before operating
this device,.
• Retain this manual for future reference.
Safety Precautions
Power Source
The set must only be operated with 220-240V AC,
50 Hz power supply.
• Ensure that the correct voltage setting is selected
if variable voltage power supply is used.
WARNING: Disconnect power from the device if
it is not to be used for an extended period of time.

Power Cord

• Do not place objects on the power cord or tie a
knot in it.
• Occasionally check the condition of the power
cord. Repair to or replacement of the power cord
must only be performed by a qualified technician.

Receiver

• Do not expose the receiver to external heat
sources.
• Do not expose the receiver to high humidity, fluid,
or condensation.
• Place the receiver on a solid and safe surface.
• Ensure that good air circulation is provided. Do
not place the receiver on a surface, such as fabric,
that can impede correct ventilation.
2
Symbols used in this manual
The following symbols are used in this manual.
WARNING
Ignoring instructions indicated with
result in serious injury or death.
CAUTION
Ignoring instructions indicated with
result in injury or damage to the device.
IMPORTANT
Important instructions relating to correct usage of the
device. Read these instructions carefully to avoid
damaging the device.
NOTE: Relevant information about a particular
operation are marked with

Batteries

Warning: Incorrect installation of batteries may
cause battery leakage and corrosion, resulting in
damage to the remote control.
Do not mix old and new batteries, or batteries of
different types.
Do not attempt to recharge non-rechargeable
batteries.
Do not dispose of batteries in a fire.
Do not dispose of batteries with normal household
waste, take to a local recycling centre.
WARNING can
CAUTION can
NOTE.