Dhcp Server Configuration; Samba / Cifs; Samba Service; File Access Cache - Thecus 1U4600 User Manual

DHCP Server Configuration

A DHCP server can be configured to assign IP addresses to devices connected to the
LAN port. To configure these ports, choose LAN from the System Network menu.
DHCP Configuration
Item
DHCP Server
Start IP
End IP
DNS Server
NOTE
WARNING

Samba / CIFS

There are 4 options is currently allow Admin to Enable/Disable to operate 1U4600
associated with Samba / CIFS protocol. With the option changed, it will need to
reboot system to activate.

Samba Service

Used for letting the operating system of UNIX series and SMB/CIFS of Microsoft
Windows operating system (Server Message Block / Common Internet File
System).Do the link in network protocol. Enable or Disable SMB/CIFS protocol for
Windows, Apple, Unix drive mapping.

File Access Cache

File Access Cache is default Enable. This option will help to increase the
performance while single client access share folder in writing under SMB/CIFS
protocol.
Description
Enable or disable the DHCP server to automatically assign IP
address to PCs connected to the LAN interface.
Specifies the starting IP address of the DHCP range.
Specifies the ending IP address of the DHCP range.
Displayed the DNS server IP address.
The IP Segment of WAN and LAN should not overlap.
The IP address of the LAN interface should not be in the range of the Start
IP address and End IP address.
40