Dhcp/Radvd - Thecus 8900 series User Manual

Network Configuration (NIC port)
Link speed
Link status
MAC address
Jumbo Frame Support
IPv4/IPv6
Mode
IP
Netmask/Prefix Length
Gateway
Default gateway
NOTE
WARNING

DHCP/RADVD

From the System Network menu, choose DHCP/RADVD, and the
DHCP/RADVD Configuration screen appears. This screen displays available NIC
status. If each NIC has been set-up to a static IP, then each NIC can be configured
to act as DHCP/RADVD server.
Display associated NIC port link speed.
Display associated NIC port link status.
MAC address of the network interface.
Enable or disable Jumbo Frame Support of associate interface on your
Thecus IP storage.
Click to enable IPv4/IPv6 for TCP/IP. The default is IPv4 enabled.
It can choose a static IP or Dynamic IP.
IP address of associate NIC interface.
Input netmask for IPv4 and Prefix length for IPv6.
Gateway for associate NIC.
It can be chosen from a drop down list of default gateway that's been used
for the Thecus IP storage.
• Only use Jumbo Frame settings when operating in a Gigabit environment where
all other clients have Jumbo Frame Setting enabled.
• Proper DNS setting is vital to networks services, such as SMTP and NTP.
Most faster Ethernet (10/100) Switches/Routers do not support Jumbo Frame and will not be
able to connect to your Thecus NAS after Jumbo Frame is turned on.
68