Safety Warnings - Thecus 1U4600 User Manual

Safety Warnings

For your safety, please read and follow the following safety warnings:
Read this manual thoroughly before attempting to set up your 1U4600.
Your 1U4600 is a complicated electronic device. DO NOT attempt to repair it
under any circumstances. In the case of malfunction, turn off the power
immediately and have it repaired at a qualified service center. Contact your
vendor for details.
DO NOT allow anything to rest on the power cord and DO NOT place the
power cord in an area where it can be stepped on. Carefully place connecting
cables to avoid stepping or tripping on them.
Your 1U4600 can operate normally under temperatures between 0°C and
40°C, with relative humidity of 20% – 85%. Using the 1U4600 under
extreme environmental conditions could damage the unit.
Ensure that the 1U4600 is provided with the correct supply voltage (AC 100V
~ 240V, 50/60 Hz, 3A). Plugging the 1U4600 to an incorrect power source
could damage the unit.
Do NOT expose the 1U4600 to dampness, dust, or corrosive liquids.
Do NOT place the 1U4600 on any uneven surfaces.
DO NOT place the 1U4600 in direct sunlight or expose it to other heat
sources.
DO NOT use chemicals or aerosols to clean the 1U4600. Unplug the power
cord and all connected cables before cleaning.
DO NOT place any objects on the 1U4600 or obstruct its ventilation slots to
avoid overheating the unit.
Keep packaging out of the reach of children.
If disposing of the device, please follow your local regulations for the safe
disposal of electronic products to protect the environment.
3