KVH Industries FB250 User Manual page 222

Chapter 5: Troubleshooting
ID
08031
Failed to
enter normal
operation
08032
Firmware image
version lower
than active
antenna
version
08033
Firmware image
doesn't
support
antenna
hardware
08034
Antenna failed
to exit Flash
Manager. Power
cycle needed
08035
Unable to open
port for HPA
burst
monitoring
208
Event Text
Status signaling
Explanation
Antenna failed to
start up normally.
The firmware in the
antenna is newer
than expected by
the terminal.
The antenna
hardware version is
not supported by
the terminal.
New firmware was
successfully
uploaded to the
antenna but the
antenna failed to
start normally with
the new firmware.
There was an error
communicating with
the antenna.
Remedy
Reboot the
terminal.
Contact your
distributor if the
problem persists.
Update the terminal
software.
Contact your
distributor.
Reboot the
terminal. Contact
your distributor if
the problem
persists.
Reboot the
terminal. Contact
your distributor if
the problem
persists.