Event Messages - KVH Industries FB250 User Manual

Event messages

Display of event messages
The terminal can detect events during POST (Power On Self Test) or CM
(Continuous Monitoring). When the terminal detects an event that requires
your action, it issues an event message.
When your terminal issues an event
message, the Terminal indicator or
the Antenna indicator in the LED
panel on top of the terminal signals
the event, according to the tables
Terminal indicator and Antenna
indicator in the previous section.
You can see the active event messages in the web interface by clicking the
warning symbol in the icon bar at the top in the web interface. You can also
see the messages in the TracPhone FleetBroadband IP Handset.
All events are logged in the event log. For information on the event log, see
Viewing the Event list or the Event log on page 182.
Chapter 5: Troubleshooting
Status signaling 197