Chapter 4: Using the web interface
If you select 3.1 kHz Audio, all outgoing calls, except UDI/RDI, will use
•
the call type 3.1 kHz Audio. If you make a Standard call it will be
converted to a 3.1 kHz Audio call. Outgoing UDI or RDI sessions will be
not be influenced by this setting.
Note
5. Click Apply.
108
You can override the call type setting for outgoing calls by
dialing one of the following prefixes before the number:
•
1* (force the call to Standard)
•
2* (force the call to 3.1 kHz Audio)
Refer to Overriding the default outgoing call type on page 45.
Setting up the interfaces