KVH Industries FB250 User Manual page 173

Saving a configuration to a file
If you need to reuse a configuration in another terminal of the same type and
software version, you can save your current configuration to a file, which can
then be loaded into the other terminal.
Note
Configuration files can only be exchanged between terminals with
the same software version!
To save your current configuration to a file, do as follows:
1. In the ADMINISTRATION page, under Configuration, click Save.
2. Accept the default destination file name or type in the destination file name
and location.
3. Click OK.
The configuration is now saved to a file. This file is used to load the
configuration into another terminal. See the next section.
Loading a configuration from a file
To load a configuration from a file, do as follows:
1. In the ADMINISTRATION page, under Configuration, click Load.
2. Click Browse... to browse to the file you want to import. Then click Open.
3. Click Load.
The new configuration is now loaded into your terminal.
Logging off administration
If you have not entered anything for 30 minutes under ADMINISTRATION, you
are logged off automatically.
To log off manually, click Logoff under administrator logoff in the
ADMINISTRATION page.
Chapter 4: Using the web interface
Administration 159