Table of Contents
Advertisement
Rev 2 Jan.13
3. In the LAN section, select On beside VPN Passthrough, and click Submit.
(Submit button appears once you make a selection.)
Configure APN details
Your mobile hotspot comes preconfigured with the APN (Access Point Name) for
AT&T preconfigured.
The APN is checked to determine the type of network connection to establish.
To add an APN for another network:
1. On the Unite Manager homepage, log in as Administrator.
2. Click Settings > Network > APN.
3. In the blank line, enter the APN (obtained from your carrier).
4. Enter the Username and Password, if these are required for the wireless
network.
5. Select the network Authentication mode. The options are:
· None (default)
· PAP
· CHAP
· PAP or CHAP
6. Click
beside the new APN entry.
To select the APN to use:
1. Select Active beside the APN entry to be used.
Advanced Settings
51
Advertisement
Table of Contents
