Removing The Heat Sink - Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual

Processors
4. "Sliding the server out of the rack" on page 42
5. "Opening the server" on page 44
6. "Removing the CPUMEMR" on page 190

10.3.3 Removing the heat sink

Figure 128: Removing the heat sink
Ê Loosen the captive screws of the heat sink alternately until they are fully
released.
Ê Loosen the heat sink by turning it back and forth and then lift it out.
216 Upgrade and Maintenance Manual
RX900 S2