Removing The Engaging Hooks; Inserting An Expansion Card In The Removal Tool - Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual

8.4.5

Removing the engaging hooks

Figure 65: Removing the engaging hooks
Ê Push the green engaging hooks down in the direction of the arrows (1) until
they disengage from the removal tool.
Ê Remove the engaging hooks (2) and keep them in a safe place.
8.4.6

Inserting an expansion card in the removal tool

Please choose one of the following procedures:
– "Long expansion cards" on page 128
– "Short expansion cards such as the network adapter D2735" on page 128
Complete the procedure by performing
all expansion cards" on page
RX900 S2
129.
Upgrade and Maintenance Manual
Expansion cards and BBU
"Check the result of the installation for
127