Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual page 36

Safety instructions
Modules with electrostatic-sensitive components
Systems and components that might be damaged by electrostatic discharge
(ESD) are marked with the following label:
Figure 2: ESD label
When you handle components fitted with ESDs, you must observe the following
points under all circumstances:
Remove the power plug before installing or removing components
containing ESDs.
You must always discharge yourself of static charges (e.g. by touching a
grounded object) before working.
The equipment and tools you use must be free of static charges.
Only touch the components at the positions highlighted in green (touch
points).
Do not touch any exposed pins or conductors on a component.
Use a grounding cable designed for this purpose to connect yourself to the
system unit as you install components.
Place all components on a static-safe base.
I
You will find a detailed description for handling ESD components in the
relevant European or international standards (DIN EN 61340-5-1,
ANSI/ESD S20.20).
36 Upgrade and Maintenance Manual
RX900 S2