Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual page 276

Baseboard
14.5.3 Removing the TPM
Ê Remove the baseboard as described in section
on page 285.
Ê Lay the baseboard on a soft, antistatic surface with its component side
facing down.
Figure 175: Removing the TPM screw
Ê Locate the slotted lower end of the TPM screw (1).
Ê Remove the TPM screw using a thin slotted screw driver (e.g. watchmaker's
screw driver) (2).
V
CAUTION!
Ensure to turn the screw clockwise in order to remove it!
Otherwise the thin metal bar may break, rendering it impossible to
loosen the screw.
276 Upgrade and Maintenance Manual
"Removing the baseboard"
RX900 S2