Starting The Task; Removing The Pci Riser - Fujitsu PRIMERGY RX900 S2 Upgrade And Maintenance Manual

Expansion cards and BBU
Replacing the expansion card: tool-less

8.10.2 Starting the task

Ê Perform the following procedures:
1. "Opening the rack door" on page 40
2. "Locate the faulty server" on page 37
3. "Shutting down the server" on page 41
4. "Sliding the server out of the rack" on page 42
5. "Removing the rear cover" on page 46
6. "Locate the faulty component by PRIMERGY diagnostics indicators" on
page 39

8.10.3 Removing the PCI Riser

Figure 94: Removing the PCI Riser
164 Upgrade and Maintenance Manual
RX900 S2