Interactive pen display
CUSTOMIZING PEN BUTTONS
Select the P
tab to change the functions assigned to the side switches and tip of your pen.
EN
Note: Some product configurations may include a pen without side switches.
Double-click here to change the function assigned to the
pen tip. The tip must be set to C
most graphics applications.
You can change the S
IDE
way you like the pen to work when using click
functions.
To access the S
S
IDE
WITCH
on the O
... button at the bottom of the
PTIONS
control panel. In the O
•
Select H
C
OVER
LICK
functions without touching the pen tip to
the pen display screen surface.
•
Select C
& T
LICK
AP
switch while touching the pen tip to the pen
display screen surface in order to perform a
click function. C
LICK
precise placement of your click functions,
and is the default setting for Tablet PCs.
•
Choose Right or Left for right-handed or
left-handed orientation.
•
Use the Brightness Adjustment slider to set
your preferred brightness for the screen.
Contents
in order to draw in
LICK
S
M
to fit the
WITCH
ODE
M
settings, click
ODE
dialog box:
PTIONS
to perform click
and press the side
& T
enables the
AP
Contents
Index
When you bring the pen tip within
5 mm (0.20 inch) of the pen display
screen surface without touching the
screen and press the upper or lower
side switch, the selected function
occurs.
Tip:
Index
To make double-clicking easier,
set the side switch to double-
click automatically by selecting
D
C
.
OUBLE
LICK
44
44