Video; Fm/Am Radio (Am Radio Feature Is Available Only On Rx-S600.) - Yamaha RX-S600 Owner's Manual

Video

Problem
No video.
No video from the playback device (connected to
the unit with HDMI).
The menu of the unit is not displayed on the TV.
FM/AM radio
(AM radio feature is available only on RX-S600.)
Problem
FM radio reception is weak or noisy.
AM radio reception is weak or noisy.
Radio stations cannot be selected automatically.
AM radio stations cannot be registered as
presets.
Cause
Another input source is selected on the unit.
Another input source is selected on the TV.
The video signal output from the unit is not supported by the TV.
The cable connecting the unit and TV (or playback device) is
defective.
The input video signal (resolution) is not supported by the unit.
The TV does not support HDCP (High-bandwidth Digital Content
Protection).
The number of devices connected to the HDMI OUT jack is over
the limit.
The TV is not connected to the unit via HDMI.
Another input source is selected on the TV.
Cause
There is multi-path interference.
Your area is too far from the FM station transmitter.
The noises may be caused by fluorescent lamps, motors,
thermostats, or other electrical equipment.
Your area is too far from the FM station transmitter.
The AM radio signal is weak.
Auto Preset has been used.
Remedy
Select an appropriate input source with the input selection keys.
Switch the TV input to display the video from the unit.
Check the video output setting of the playback device. For information about
video signals supported by the TV, refer to the instruction manuals for the TV.
If there is no problem with the connection, replace with another cable.
To check the information about the current video signal (resolution), use "Signal
Info" in the "Option" menu (p.76). For information about video signals supported
by the unit, see "HDMI signal compatibility" (p.113).
Refer to the instruction manuals for the TV and check the TV's specifications.
Disconnect some of the HDMI devices.
You can display the menu of the unit on the TV only when they are connected with
an HDMI cable. If necessary, use an HDMI cable to connect them (p.19 to 22).
Switch the TV input to display the video from the unit (HDMI OUT jack).
Remedy
Adjust the FM antenna height or orientation, or place it in a different location.
Press MODE to select monaural FM radio reception (p.44).
Use an outdoor FM antenna. We recommend using a sensitive multi-element
antenna.
It is difficult to completely eliminate noise. It may be reduced by using an outdoor
AM antenna.
Select the station manually (p.44).
Use an outdoor antenna. We recommend using a sensitive multi-element
antenna.
Adjust the AM antenna orientation.
Select the station manually (p.44).
Use an outdoor AM antenna. Connect it to the ANTENNA (AM) jack together with
the supplied AM antenna.
Auto Preset is for registering FM radio stations only. Register AM radio stations
manually (p.45).
APPENDIX ➤ Troubleshooting
104
En