Changing The Fm/Am Tuning Frequency Setting (Tu); Switching The Video Signal Type (Tv Format); Restoring The Default Settings (Init); Updating The Firmware (Update) - Yamaha RX-S600 Owner's Manual

Changing the FM/AM tuning frequency setting (TU)

(Asia and General models only)
TU FM50/AM9
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
Settings
Select this when you want to adjust the FM frequency by 100-kHz
FM100/AM10
steps and AM by 10-kHz steps.
Select this when you want to adjust the FM frequency by 50-kHz steps
FM50/AM9 (default)
and AM by 9-kHz steps.

Switching the video signal type (TV FORMAT)

TV FORMAT NTSC
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
Settings
NTSC, PAL
Default
U.S.A., Canada, Korea and General models: NTSC
Other models: PAL

Restoring the default settings (INIT)

INIT CANCEL
Restores the default settings for the unit.
Choices
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.

Updating the firmware (UPDATE)

UPDATE USB
New firmware that provides additional features or product improvements will be
released as needed. Updates can be downloaded from our website. If the unit is
connected to the Internet, you can download the firmware via the network. For details,
refer to the information supplied with updates.
■
Firmware update procedure
Do not perform this procedure unless firmware update is necessary. Also, make sure
you read the information supplied with updates before updating the firmware.
1
Press STRAIGHT repeatedly to select "USB" or "NETWORK" and press INFO to
start firmware update.
Choices
USB Update the firmware using a USB memory device.
NETWORK Update the firmware via the network.
• If the unit detects newer firmware over the network, the envelope icon (p) will appear in the screen. In this
case, you can also update the unit's firmware by following the procedure in "Updating the unit's firmware via
the network" (p.98).

Checking the firmware version (VERSION)

VERSION xx.xx
Check the version of firmware currently installed on the unit.
• You can also check the firmware version in "Network Update" (p.92) in the "Setup" menu.
• It may take a while until the firmware version is displayed.
CONFIGURATIONS ➤ Configuring the system settings (ADVANCED SETUP menu)
94
En