Audio And Video Signal Flow - Yamaha RX-V1800 Owner's Manual

Audio and video signal flow

Audio signal flow
Input
HDMI
DIGITAL AUDIO
(COAXIAL)
DIGITAL AUDIO
(OPTICAL)
AUDIO
Digital output
Analog output
Notes
• 2-channel as well as multi-channel PCM, Dolby Digital and
DTS signals input at one of the HDMI input jacks can be output
at the HDMI OUT jack only when "SUPPORT AUDIO" is set
to "OTHER" (see page 85).
• The following types of audio signals can be only input at HDMI
input jacks:
– DSD
– Dolby TrueHD
– Dolby Digital Plus
– DTS-HD Master Audio
– DTS-HD High Resolution Audio
Video signal flow
Output
COMPONENT
S VIDEO
y
You can deinterlace and convert the resolution of the video
signals by using "VIDEO SET" parameters. See page 89 for
details.
Notes
• When the analog video signals are input at the COMPONENT
VIDEO, S VIDEO and VIDEO jacks, the priority order of the
input signals is as follows:
1. COMPONENT VIDEO
2. S VIDEO
3. VIDEO
• Digital video signals input at the HDMI input jacks cannot be
output from analog video output jacks.
• The analog component video signals (with 480i (NTSC)/576i
(PAL) of resolution only) are converted to the S-video or
composite video signals and output at the VIDEO or S VIDEO
MONITOR OUT jacks.
• The analog component video signals with 1080p of resolution
are only output at the COMPONENT VIDEO MONITOR OUT
jacks.
• The OSD signal is not output at the DVR OUT and VCR OUT
jacks and is not recorded.
Input
HDMI
VIDEO
VIDEO
Through
Video conversion ON (see page 89)
Connections
Output
23
En