Connecting Video Devices (Such As Bd/Dvd Players) - Yamaha Aventage RX-A870 Owner's Manual

⬛
Connecting another TV or a projector
The unit has two HDMI output jacks. If you connect another TV or a projector to the unit with
an HDMI cable, you can switch the TV (or projector) to be used for watching videos with the
remote control (p.59).
HDMI OUT 2 jack
The unit (rear)
HDMI OUT
( HDCP2.2 )
TRIGGER OUT
12V 0.1A
2 1
ARC
HDMI OUT
IN
( HDCP2.2 )
2 1
1
OUT ARC (1 BD/DVD)
REMOTE
AUDIO 1 ANTENNA
( 4
(2 TV) RADIO)
FM AM
OPTICAL
AUDIO 2
TV (already connected)
OPTICAL
AUDIO 3
AV 1 AV 2
COMPONENT VIDEO VIDEO
COAXIAL
COAXIAL Y P P
B R
PHONO AUDIO 4 AUDIO 5
GND
Y
HDMI Control is not available on the HDMI OUT 2 jack.
TV
HDMI
HDMI input
HDMI
Projector
En

Connecting video devices (such as BD/DVD players)

Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles to the
unit. Depending on the video/audio output jacks available on your video device, choose one of
the following connections. We recommend using an HDMI connection if the video device has
an HDMI output jack.
X
If the combination of video/audio input jacks available on the unit does not match your video device, change its
combination according to the output jacks of your device (p.32).
⬛
HDMI connection
Connect a video device to the unit with an HDMI cable.
The unit (rear)
HDMI ( ) HDMI
HDCP2.2
1 2 3 4 5 6 7
1
C (1 BD/DVD)
A
AM
PRE OUT
CENTER SUR. BACK SURROUND
SPEAKERS
SINGLE
AV 2
VIDEO SURROUND CENTER FRONT
ZONE OUT
FRONT SUBWOOFER
5
ZONE 2
1
2
If you select the input source by pressing HDMI 1-7, the video/audio played back on the video
device will be output from the unit.
Y
If your video device supports HDCP 2.2, connect the device to the HDMI 1-3 jacks.
31
HDMI 1-7 jacks
HDMI output
HDMI
HDMI
HDMI
Video device