• Input jacks in parentheses indicate the jacks to which the SCENE function (page 24) is assigned by the initial factory settings. To use the SCENE function

with the initial factory settings, connect external components that support the SCENE function to these jacks.

• You can change the name of the input source displayed on the front panel display as necessary (page 53).

• See page 58 on how to use the ZONE2/3 OUT jacks.

• When you connect an external component with analog audio and component video (or composite) output jacks, connect the analog audio output to the

AUDIO 1 or AUDIO 2 jacks of this unit while making a video connection (component video or composite). Then select the video to be output when

"AUDIO 1" or "AUDIO 2" is selected as the input source (page 45).

■

Audio player

External component

External component with optical digital

output

External component with coaxial digital

output

External component with analog audio

output

Turntable

• If your CD player has a coaxial digital output jack, connect it to the AV3 jack of this unit. In this case, you can use the SCENE function (page 24) with the

initial factory settings.

• When connecting a turntable with a low-output MC cartridge to the PHONO jacks, use an in-line boosting transformer or MC-head amplifier.

• Connect your turntable to the GND terminal of this unit to reduce noise in the signal.

About audio/video output jacks

When using the AV OUT jacks: connect these jacks to composite video and analog audio input jacks of an external

component.

When using the AUDIO OUT jacks: connect these jacks to analog audio input jacks of an external component.

When using the DIGITAL AUDIO (OPTICAL OUT) jack: connect this jack to optical digital input jack of an

external component.

■

Internal signal flow