Yamaha RX-S600 Owner's Manual page 80

Menu Item
DSP Parameter
Sound Lipsync
Volume
Auto Power Standby
ECO
ECO Mode
Input Rename
Dimmer
Function Memory Guard
DC OUT
Party Mode Set
Information
IP Address
MAC Address Filter
Network DMC Control
Network Standby
Network Name
Network Update
Language
Function
CINEMA DSP 3D Mode Enables/disables CINEMA DSP 3D.
Panorama Enables/disables the broadening effect of the front sound field.
Center Width Adjusts the broadening effect of the center sound field.
Dimension Adjusts the difference in level between the front and surround sound fields.
Center Image Adjusts the center orientation level (broadening effect) of the front sound field.
Select Selects the method to adjust the delay between video and audio output.
Adjustment Adjusts the delay between video and audio output manually.
Dynamic Range Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Main Zone Max Volume Sets the main zone maximum volume to prevent excessive loudness.
Main Zone Initial Volume Sets the main zone initial volume for when this receiver is turned on.
Zone2 Max Volume Sets the Zone2 maximum volume to prevent excessive loudness.
Zone2 Initial Volume Sets the Zone2 initial volume for when the Zone2 is turned on.
Sets the amount of time for the auto-standby function.
Enables/disables the eco mode (power saving mode).
Changes the input source name displayed on the front display.
Adjusts the brightness of the front display.
Prevents accidental changes to the settings.
Power Mode Selects how to supply power through the DC OUT jack.
Enables/disables switching to the party mode.
Displays the network information on the unit.
Configures the network parameters (such as IP address).
Sets the MAC address filter to limit access to the unit from other network devices.
Selects whether to allow a DLNA-compatible Digital Media Controller (DMC) to control playback.
Selects whether to enable/disable the function that turns on the unit from other network devices.
Edits the network name (the unit's name on the network) displayed on other network devices.
Updates the firmware via the network.
Select an on-screen menu language.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
Page
85
85
86
86
86
86
86
87
87
87
87
87
88
88
88
89
89
89
89
90
90
91
91
91
91
92
92
80
En